Lamello
Verbindungstechnik
Lamello

CNC partner networks

From construction and planning to cutting tools and machining using a CNC

Efficient P-System use is supported by these partner companies:

CNC Partnernetzwerk von Lamello AG

2020

2020 Technologies
323 Chemin des Plaines
FR-06372 Mouans-Sartoux

www.2020spaces.com

Software for efficient planning of Lamello products


3D Spazio

BrainSoftware srl
Via Roma 25/a
IT-31010 Fonte TV

www.spazio3d.com

3D CAD-CAM Software for efficient planning of Lamello products

P-System connector / machining

  • Connector and profile groove for Clamex P-14, Medius P 14/10, P-10
  • Connector and profile groove for Tenso P-14
  • Connector and profile groove/drill hole for Divario P-18
  •  Available for WOP and ISO controller

P-System generator for automatic positioning

  • Number of connectors
  • In the board thickness
  • Illustration

P-System machining

  • Enabling of macros by CNC manufacturer
  • Macros on the CNC machine determine the options
  • Machining is possible with the P-System disc cutter

Cabineo connector / Machining

  • Connectors and machining for Cabineo: 8 + 12
  • Available for WOP and ISO controller

Cabineo generator for automatic positioning

  • Number of connectors
  • Illustration

Cabineo machining

  • Macros enabled by CNC manufacturer

CNC Partnernetzwerk von Lamello AG

Alphacam

Vero Software GmbH
Borchersstraße 20
DE-52072 Aachen

www.licom-alphacam.com

CAM software for efficient planning of Lamello products

P-System macros

  • Profile groove for P-10 and P14
  • Graphic illustration
  • Graphic simulation of machining
  • Profile groove must be positioned individually
  • Free download: P-System Macro
  • Tested for WOP and ISO controller

P-System macro enables:

  • Surface connections
  • 90° corner connections
  • Bisecting mitres in a vast range of angles
  • Right-angled mitres in a vast range of angles
  • Machining possible with P-System disc cutter and shaft tool

Cabineo Macros

  • Machining as 3x drill holes or cuts
  • Graphic illustration
  • Graphic simulation of machining
  • No automatic positioning of counterbore
  • Machining must be positioned individually
  • Free download


CNC Partnernetzwerk von Lamello AG

ATEMAG

ATEMAG Aggregattechnologie
Mühlenmatten 2
DE-77716 Hofstetten

www.atemag.de

Aggregates for groove cutting, drilling and milling for use of Lamello products

 



CNC Partnernetzwerk von Lamello AG

Biesse

Biesse S.p.A.
Via della Meccanica 16
IT-61122 Pesaro (PU)
Italien


www.biesse.com

P-System components

  • Components enabled by Biesse Service: supportbiesse.com
  • Possible from NC-Hops 5.6 upwards (software version in DE, AT, CH)
  • Possible from bSolid 2.5 (6/2015) upwards (software version in all other countries)
  • Possible on 4 or 5-axle machines
  • Machining with bSolid is only possible with the P-System disc cutter
  • Machining with NC-Hops is possible with P-System disc cutter and shaft tool
  • Shaft tool can only be used on 5-axle machines

P-System component enables:

  • Surface connections
  • 90° corner connections
  • Bisecting mitres in a vast range of angles
  • Right-angled mitres in a vast range of angles

P-System tool pack

  • In certain markets, a specific P-System tool pack is available with free connectors. Information on this is available from your Biesse distributor

CNC Partnernetzwerk von Lamello AG

Cabinet Vision

Vero Software Limited
3800 Palisades Drive
US-35405 Tuscaloosa, AL

www.cabinetvision.com

P-System

Integrated as of Version 10:

  • Clamex P-14
  • Clamex P-10
  • Clamex P-14-10 Medius
  • Tenso P-14
  • Divario P-18

The following joints are possible: butt joints, end to end and mitres in all angles

Cabineo

Integrated as of Version 10:

  • Cabineo 8
  • Cabineo 10
CNC Partnernetzwerk von Lamello AG

CAD+T

CAD+T Consulting GmbH
Gewerbepark 16
AT-4052 Ansfelden

www.cadt-solutions.com

Software for efficient planning of Lamello products


Cadwork

Cadwork SA
Route du Devin 2

CH-1623 Semsales

http://www.cadwork.com/indexL1a.jsp

2D / 3D CAD Software for the efficient planning of Lamello products

P-System connectors/machining

  • Connector and profile groove for Clamex P-14, Medius P 14/10, P-10
  • Connector and profile groove for Tenso P-14
  • Connector and profile groove/hole for Tenso Divario P-18
  • The connector can be positioned individually
  • Visualisation in graphs

P-System generator for automatic positioning

  • Number of connectors and distribution
  • Choosing the right connector size
  • Positioning within the panel thickness
  • Assessing the interior angle
  • Visualisation in graphs
  • Surface connections 
  • 90° corner connections
  • Angle bisector mitres at a huge range of angles
  • Obtuse-angled mitres at a huge range of angles
  • From version 23
  • Data export as BTL / SAT / DXF

P-System machining

  • Triggering the macros provided by the CNC manufacturer
  • The macros on the CNC machine determine the possibilities
  • Machining possible with the P-System disc cutter

Cabineo connectors/machining 

  • Connector and machining for Cabineo 8 + 12 
  • as a triple hole
  • The connector can be positioned individually
  • Visualisation in graphs

Cabineo generator for automatic positioning

  • Number of connectors and distribution
  • Choosing the right connector size
  • Positioning within the panel thickness
  • Visualisation in graphs
  • Surface connections
  • 90° corner connections
  • From version 23
  • Data export as BTL / SAT / DXF
CNC Partnernetzwerk von Lamello AG

Format 4

Felder KG
KR-Felder-Strasse 1
AT-6060 Hall in Tirol
Österreich

www.felder-group.com

P-System component

  • From Woodflash 3.0, pre-installed on 4 or 5-axle machine
  • Components enabled by Format4 service or team viewer
  • Machining is enabled by the P-System disc cutter and shaft tool

P-System component enables:

  • Surface connections
  • 90° corner connections
  • Bisecting mitres in a vast range of angles
  • Right-angled mitres in a vast range of angles

P-System tool pack

  • Information on the specific P-System tool pack with free connectors is available from your Format4 distributor

Cabineo components

  • Available from a Format4 distributor

CNC Partnernetzwerk von Lamello AG

Gannomat

ERWIN GANNER GmbH & Co KG
Hermann-Ganner-Straße 1
AT-6410 Telfs

www.gannomat.com

CNC Partnernetzwerk von Lamello AG

Grotefeld

Grotefeld GmbH
Eugen-Gerstenmaier-Straße 1
DE-32339 Espelkamp

www.grotefeld.com

Aggregates for groove cutting, drilling and milling for use of Lamello products

HOLZ-HER

HOLZ-HER GmbH
Plochinger Strasse 65
DE-77622 Nürtingen

holzher.de

P-System components

  • Integrated from NC-Hops 5.0 upwards with Connect pack (5/2016)
  • An option on 4 or 5-axle machines
  • Machining is possible with the P-System disc cutter and shaft tool
  • Shaft tool can only be used on 5-axle machines

P-System component enables:

  • Surface connections
  • 90° corner connections
  • Bisecting mitres in a vast range of angles
  • Right-angled mitres in a vast range of angles

P-System and Cabineo components for Nextec

  • From HOPS 7 and the “BetterNest” software
  • The “Cabinet Control Base Module” Cabinet generator includes connection options with Clamex P and Cabineo
  • Clamex P “round pocket cutter” cover from the HOLZ-HER distribution partner

P-System tool pack

  • Connect pack with Lamello connector voucher, available from your Holzher distributor


Holzfraese

Holzfraese CNC-Manufaktur
Erfurter Strasse19
DE-44143 Dortmund

www.cnc-holzfraese.de

P-System components

  • No direct cutting of P-System grooves
  • Macro for positioning bores for use with Zeta P2
  • Positioning pins or clips are inserted into the Zeta P2 groove cutter. Using the positioning bores, the Zeta P2 is placed in the correct spots and P-System grooves can be cut
  • Surface connections
  • 90° corner connections

Cabineo components

  • Cabineo 8+12
  • For milling the Cabineo machining


Homag

HOMAG Holzbearbeitungssysteme GmbH
Homagstrasse 3 – 5
DE-72296 Schopfloch


www.homag.com

P-System components: 

  • Installation enabled by Homag Service, modificationhomag.de 
  • Possible from Software Version WoodWOP 5.0 (Build 866)
  • Machining possible with the P-System disc cutter and shaft tool
  • Shaft tool can only be used on 5-axle machines

P-System component enables:

  • Surface connections
  • 90° corner connections
  • Bisecting mitres in a vast range of angles
  • Right-angled mitres in a vast range of angles

CNC Partnernetzwerk von Lamello AG

HSD

HSD SpA
Piazzale Alfio de Simoni s/n
IT-61122 Pesaro

www.hsd.it

Aggregates for groove cutting, drilling and milling for use of Lamello products


CNC Partnernetzwerk von Lamello AG

iFurn

iFurn GmbH
Planckstraße 24
DE-32052 Herford

www.ifurn.net

Product data services for furniture construction and manufacturing

  • Interface between the supplier and furniture builder
  • Cloud service tailored to the needs of the furniture industry
  • The supplied data can be used in online catalogues, configurators, and CAD/CAM solutions.

Data availability & quality

  • Supplies data including visualisation and machining information.
  • Only standardised, verified data from the supplier (manufacturer).
  • Integrated solutions, available for a wide range of software solutions*
  • Cloud availability, 24/7/365, always up-to-date

* based on software technology from imos AG


IMA

IMA Klessmann GmbH
Industriestraße 3
DE-32312 Lübbecke

www.ima.de

P-System components

  • From IMA WOP 8.0 from 2015, pre-installed on 4 or 5-axle machines
  • A macro is available for IMA WOP 6.0 from 2014
  • Components enabled by IMA Service
  • Machining possible with the P-System disc cutter and shaft tool
  • Shaft tool can only be used on 5-axle machines

P-System component enabled:

  • Surface connections
  • 90° corner connections
  • Bisecting mitres in a vast range of angles
  • Right-angled mitres in a vast range of angles

CNC Partnernetzwerk von Lamello AG

imos

imos AG
Planckstraße 24
DE-32052 Herford

www.imos3d.com

3D CAD software

P-System connectors/machining

  • Connector and profile groove for Clamex P-14, Medius P 14/10, P-10
  • Connector and profile groove for Tenso P-14
  • Connector and profile groove/hole for Tenso Divario P-18
  • The connector can be positioned individually
  • Visualisation in graphs

P-System generator for automatic positioning

  • Number of connectors and distribution
  • Choosing the right connector size
  • Positioning within the panel thickness
  • Assessing the interior angle
  • Visualisation in graphs
  • Surface connections
  • 90° corner connections
  • Angle bisector mitres at a huge range of angles
  • Obtuse-angled mitres at a huge range of angles
  • From imos iX 2017

P-System machining

  • Triggering the macros provided by the CNC manufacturer
  • The macros on the CNC machine determine the possibilities
  • Machining possible with the P-System disc cutter
  • Interface for Wop and ISO controls

Cabineo connectors/machining

  • Connector and machining for Cabineo 8 + 12
  • As a triple hole
  • The connector can be positioned individually
  • Visualisation in graphs

Cabineo generator for automatic positioning

  • Number of connectors and distribution
  • Choosing the right connector size
  • Positioning within the panel thickness
  • Visualisation in graphs
  • Surface connections
  • 90° corner connections
  • From imos iX 2017

Cabineo machining

  • The triple hole and counter-hole can be machined without a macro through the use of a post-processor
  • Interface for Wop and ISO controls

InfoTec

InfoTEC CNC

Zasutowo Kròtka 8
PL-62-330 Nekla

www.infotec-cnc.com

P-System components

  • Machining from CAM-Software or G-Code 
  • Machining possibilities and limits depend of the CAD/CAM-System 
  • CAD _ CAM _ postprocessor (info Tec) _ TPA control CNC
  • CAD _ CAM _ postprocessor (info Tec) _ InfoCAM control CNC
  • Software compatibility with TopSolid, Corpus, Solid Works SWOOD, Cobus
  • Machining possible with the P-System disc cutter

P-System component enables:

  • 90° corner connections
  • Midwall connections
  • Bisecting mitres in a vast range of angles

Process for Cabineo

  • Same principle as described above (P-system processing)
  • Machining 3x drill holes with drill

CNC Partnernetzwerk von Lamello AG

KCD

KCD Software
Unified Global Technologies
1252 Route 28
US-02664 South Yarmouth, MA

kcdsoftware.com

P-System

Integrated as of Version 10:

  • Clamex P-14
  • Tenso P-14

Cabineo

Integrated as of Version 10:

  • Cabineo 8
  • Cabineo 12
CNC Partnernetzwerk von Lamello AG

Komo

Komo Machine Inc
One Komo Drive
US-08701 Lakewood, New Jersey

https://komo.com

P-System component

  • Clamex P-14
  • Clamex P-10
  • Clamex P-14-10 Medius
  • Tenso P-14
  • Divario P-18
  • Machining is possible with the P-System disc cutter as well as with the shank tool
  • The shank tool can only be used on 5-axis machines

P-System component allows:

  • Surface joints
  • 90° corner joints
  • Miters in various angles
  • Butt joints in various angles

 Cabineo

  • Cabineo 8
  • Cabineo 12

    CNC Partnernetzwerk von Lamello AG

    Leitz

    Leitz GmbH & Co. KG
    Leitzstrasse 2
    DE-73447 Oberkochen

    www.leitz.org

    Tools for groove cutting, drilling and milling for use of Lamello products

    CNC Partnernetzwerk von Lamello AG

    LEUCO

    LEUCO Ledermann GmbH & Co. KG
    Willi-Ledermann-Straße 1
    DE-72160 Horb am Neckar

    www.leuco.com

    Tools for groove cutting, drilling and milling for use of Lamello products

    CNC Partnernetzwerk von Lamello AG

    Lignocam

    Lignocam Sa
    Chemin de la Routiaz 8
    CH-1806 St-Légier-La Chiésaz

    www.lignocam.com

    CAM software

    P-System machining

    • Profile groove for P-10, P-14, Medius P-14/10, Divario P
    • Hole for Clamex P
    • The profile groove needs to be positioned individually
    • Interface with ISO controls

    P-System machining made possible:

    • Surface connections
    • 90° corner connections
    • Angle bisector mitres at a huge range of angles
    • Obtuse-angled mitres at a huge range of angles
    • Machining possible with the P-System disc cutter

    Cabineo machining

    • Machining as a triple hole or groove
    • No automatic counter-hole positioning
    • The machining needs to be positioned individually

    CNC Partnernetzwerk von Lamello AG

    Masterwood

    Masterwood s.p.a.
    Via Romania 18/20
    IT-47921 Rimini

    www.masterwood.com

    P-System components

    • Components enabled by Masterwood Service
    • Possible from Masterwork 2015 with Beckhoff controller
    • Machining possible on 4 or 5-axle machines
    • Machining with P-System disc cutter and shaft tool
    • Shaft tool can only be used on 5-axle machines

    P-System component enables:

    • Surface connections
    • 90° corner connections
    • Bisecting mitres in a vast range of angles
    • Right-angled mitres in a vast range of angles

     P-System tool pack

    •  In certain markets, a specific P-System tool pack is available with free connectors. Information on this is available from your Masterwood distributor

    CNC Partnernetzwerk von Lamello AG

    Morbidelli

    SCM Group spa
    Via Emilia 71
    IT-47900 Rimini


    www.scmgroup.com

    P-System components 

    • Possible for 5-axle machines, from Xilog Plus 01.14.026
    • Possible for 4 and 5-axle machines, from Maestro 1.00.011 upwards
    • Installation of components by Morbidelli Service
    • Machining possible with P-System disc cutter

    P-System component enables:

    • Surface connections
    • 90° corner connections
    • Bisecting mitres in a vast range of angles
    • Right-angled mitres in a vast range of angles

    NC-Hops

    direkt cnc-systeme gmbh
    Brühlweg 26
    D-73553 Alfdorf- Bonholz

    www.direkt.net

    CAM software for efficient planning of Lamello products

    P-System macros

    • Profile groove for P-10, P14, Medius P-14/10, Divario P
    • Drill hole for Clamex P
    • Profile groove must be individually positioned
    • Graphic illustration
    • Graphic simulation of machining
    • For use on Holzher, Biesse, SCM, Mack, Reichenbacher, from WoodWop 7 Homag, Weeke
    • From NC-Hops 5, partial functions
    • All functions from NC-Hops 7 (additional charge)

    P-System enabled:

    • Surface connections
    • 90° corner connections
    • Bisecting mitres in a vast range of angles
    • Right-angled mitres in a vast range of angles
    • Machining possible with P-System disc cutter and shaft tool

    Cabineo macros

    • Customer can store 3x hole in program memory


    CNC Partnernetzwerk von Lamello AG

    OERTLI

    Oertli Werkzeuge AG
    Hofstrasse 1
    CH-8181 Höri

    www.oertli.com

    Tools for groove cutting, drilling and milling for use of Lamello products

    OS Datensysteme GmbH

    OS Datensysteme GmbH
    Am Erlengraben 5
    DE-76275 Ettlingen

    www.osd.de

    ERP (Enterprise Resource Planning)

    •    P-System connectors and Cabineo integrated in ERP

    2D / 3D CAD Software

    P-System Connector / Processing
    •    Connector and profile groove for Clamex P-14, Medius P 14/10, P-10
    •    Connector and profile groove for für Tesno P-14
    •    Connector and profile groove for / Bohrung für Divario P-18
    •    Visualisation in graphs

    P-System generator for automatic positioning
    •    Number of connectors and distribution
    •    Positioning in the plate thickness 
    •    Visualisation in graphs
    •    90° corner connections
    •    Bisecting mitres in a vast range of angles
    •    Dull mites in various angles
    •    From version 10.0

     P-system processing 
    •    Control of the macros from the CNC manufacturer 
    •    The macros on the CNC machine determines the possibilities
    •    Machining is possible with P-System disc cutter 
    •    Interface with Wop

    Cabineo Connector / Processing
    •    Connector and processing for Cabineo 8 + 12
    •    As a 3-hole drill 
    •    As a groove with an exterior contour
    •    Visualisation in graphs


    Cabineo Generator for automatic positioning
    •    Number of connectors and distribution
    •    Choice of correct connector size
    •    Positioning in the plate thickness
    •    Visualisation in graphs
    •    90° corner connections
    •    From version 10.0

    Cabineo Processing:
    •    Interface with Wop
     


    CNC Partnernetzwerk von Lamello AG

    Point Line

    Borm Informatik AG

    Schlagstrasse 135

    Postfach 58

    CH-6431 Schwyz


    www.pointline.com

    2D/3D CAD software

    P-System connectors/machining

    • Connector and profile groove for Clamex P-14, Medius P 14/10, P-10
    • Connector and profile groove for Tenso P-14
    • Connector and profile groove/hole for Tenso Divario P-18
    • Visualisation in graphs
    • Connector integrated into an ERP solution from Borm
    • The connector needs to be positioned individually

    P-System machining

    • Interface with Wop

     Cabineo connectors/machining

    • Connector and machining for Cabineo 8 + 12
    • The connector needs to be positioned individually
    • As a groove with an exterior contour
    • Visualisation in graphs

    Cabineo machining:

    • Interface with Wop

    rwdm

    rwdm
    René Wetzstein
    alte Aescherstr. 25

    CH-5615 Fahrwangen

    www.rwdm.ch

    Datenmanagement for carpenters 

    • Data build-up and hardware automation based on CAD + T
    • Database with over 1250 hardwar stores growing (as of March 2018)
      • >95% fully automatically generated in plan
      • CNC and ComNorm compatible (ComNorm across ERP)
    • Cabinet-, kitchen-, pedestal-, Beistoss- und Blenden-Model
      • Finished CNC programs also for custom-made products
      • Automatic parts list, hardware list

    P-System, possibilities with CAD+T

    • Connector and profile groove for Clamex P-14, Medius P 14/10, P-10
    • Connector and profile groove for für Tesno P-14
    • Connector and profile groove for / Bohrung für Divario P-18
    • Connector can be positioned individually
    • Automatic positioning possible
    • The CNC machine determines the processing options
    • Parts list possible

    Cabineo, possibilities with CAD+T

    • Connector and machining for Cabineo 8 + 12
    • Covercap for Cabineo
    • As a triple hole
    • As a groove with an exterior contour
    • The connector can be positioned individually
    • Automatic positioning possible
    • The CNC machine determines the processing options
    • Parts list possible
    CNC Partnernetzwerk von Lamello AG

    SCM Group

    SCM Group spa
    Via Emilia 71
    IT-47900 Rimini


    www.scmgroup.com

    P-System components 

    • Possible for 5-axle machines, from Xilog Plus 01.14.026
    • Possible for 4 and 5-axle machines, from Maestro 1.00.011
    • Installation of components by SCM Service
    • Machining possible with P-System disc cutter and shaft tool
    • Use of the shaft tool is only possible on 5-axle machines

    P-System component enabled:

    • Surface connections
    • 90° corner connections
    • Bisecting mitres in a vast range of angles
    • Right-angled mitres in a vast range of angles
    CNC Partnernetzwerk von Lamello AG

    Swiss all CAD

    Swiss All CAD AG
    Widenstrasse 2
    CH-9200 Gossau

    www.swissallcad.ch

    Software for efficient planning of Lamello products

    tapio

    tapio GmbH
    Landsberger Strasse 302
    DE-80687 München

    www.tapio.one

    tapio is intended to help the wood industry to evolve into the digital future itself. A common ecosystem is tapio’s answer to the question “how”. Through tapio companies themselves can shape their digital future.

    With tapio machinery manufacturers, toolmakers and material producer use the same technology platform. That way digital solutions for common customers of every size are being discovered. Tapio itself is neutral within this network and considers itself to be a supporter. Customers have the advantage that they rediscover the diversity of their physical world within solutions tapio provides.

    CNC Partnernetzwerk von Lamello AG

    TopSolid

    Missler Software
    254 L’Occitane
    FR-31670 Labège

    www.topsolid.com

    3D CAD-CAM software for efficient planning of Lamello products

    P-System connector/Machining

    • Connector and profile groove for Clamex P-14, Medius P 14/10, P-10
    • Connector and profile groove for Tenso P-14
    • Connector and profile groove/Drill hole for Divario P-18
    • Connector and profile groove for Bisco P-14, P-10
    • Connector must be individually positioned
    • Graphic illustration
    • Graphic simulation of machining
    • Available for WOP and ISO controller
    • From version 2013

    P-System machining

    • Macros enabled by CNC manufacturer
    • The macros on the CNC machine determine the options
    • Machining is possible with the P-System disc cutter

     Cabineo connector/machining

    • Connector and machining for Cabineo 8 + 12
    • Connector must be individually positioned
    • Graphic illustration
    • Graphic simulation of machining
    • Available for WOP and ISO controller
    • From 2017 version

    Cabineo machining:

    • Macros enabled by CNC manufacturer
    • Macros on the CNC machine define the options

    CNC Partnernetzwerk von Lamello AG

    TrunCAD

    TrunCAD GmbH
    Stegmühlenweg 1
    DE-88131 Lindau

    www.truncad.de

    CAM software for efficient planning of Lamello products

    P-System Machining

    • Macros enabled by CNC manufacturer
    • Macros on the CNC machine defines the options
    • Profile groove must be positioned individually
    • From version 11 (2015)
    • Can be purchased with update

    Cabineo machining

    • Machining as 3x hole
    • Automatic positioning of counterbore
    • Machining must be positioned individually
    • From 2017 version
    • Available free with update

    CNC Partnernetzwerk von Lamello AG

    Utensiltecnica

    Utensiltecnica Srl
    Via Cà Giorgino 2
    IT-47837 San Pietro RN

    www.utensiltecnica.com

    Tools for groove cutting, drilling and milling for use of Lamello products

    Vitap S.p.a.

    Vitap S.p.a.
    Via Pisana n°149
    IT-53036 Poggibonsi (Siena)

    www.vitap.it

    P-System components

    • Integrated from software version Point K2 TOP 3.6.42
    • Possible for 4-axle machines
    • Machining possible with P-System disc cutter

    P-System component enables

    • 90° corner connections
    • Midwall connections

    Component for Cabineo

    • Integrated from software version Point K2 TOP 3.6.42
    • Possible for 3- and 4-axle machines

    Component for Cabineo enables

    • Machining 3x drill holes with drill or cutter