Lamello
Verbindungstechnik
Lamello

CNC partner networks

From construction and planning to cutting tools and machining using a CNC

Efficient P-System use is supported by these partner companies:

CNC Partnernetzwerk von Lamello AG

2020

2020 Technologies
323 Chemin des Plaines
FR-06372 Mouans-Sartoux

www.2020spaces.com

Software for efficient planning of Lamello products


3D Spazio

BrainSoftware srl
Via Roma 25/a
IT-31010 Fonte TV

www.spazio3d.com

3D CAD-CAM Software for efficient planning of Lamello products

P-System connector / machining

  • Connector and profile groove for Clamex P-14, Medius P 14/10, P-10
  • Connector and profile groove for Tenso P-14
  • Connector and profile groove/drill hole for Divario P-18
  •  Available for WOP and ISO controller

P-System generator for automatic positioning

  • Number of connectors
  • In the board thickness
  • Illustration

P-System machining

  • Enabling of macros by CNC manufacturer
  • Macros on the CNC machine determine the options
  • Machining is possible with the P-System disc cutter

Cabineo connector / Machining

  • Connectors and machining for Cabineo: 8 + 12
  • Available for WOP and ISO controller

Cabineo generator for automatic positioning

  • Number of connectors
  • Illustration

Cabineo machining

  • Macros enabled by CNC manufacturer

CNC Partnernetzwerk von Lamello AG

Alphacam

Vero Software GmbH
Borchersstraße 20
DE-52072 Aachen

www.licom-alphacam.com

CAM software for efficient planning of Lamello products

P-System macros

  • Profile groove for P-10 and P14
  • Graphic illustration
  • Graphic simulation of machining
  • Profile groove must be positioned individually
  • Free download: P-System Macro
  • Tested for WOP and ISO controller

P-System macro enables:

  • Surface connections
  • 90° corner connections
  • Bisecting mitres in a vast range of angles
  • Right-angled mitres in a vast range of angles
  • Machining possible with P-System disc cutter and shaft tool

Cabineo Macros

  • Machining as 3x drill holes or cuts
  • Graphic illustration
  • Graphic simulation of machining
  • No automatic positioning of counterbore
  • Machining must be positioned individually
  • Free download


CNC Partnernetzwerk von Lamello AG

Cabinet Vision

Vero Software Limited
3800 Palisades Drive
US-35405 Tuscaloosa, AL

www.cabinetvision.com

P-System

Integrated as of Version 10:

  • Clamex P-14
  • Clamex P-10
  • Clamex P-14-10 Medius
  • Tenso P-14
  • Divario P-18

The following joints are possible: butt joints, end to end and mitres in all angles

Cabineo

Integrated as of Version 10:

  • Cabineo 8
  • Cabineo 10
CNC Partnernetzwerk von Lamello AG

CAD+T

CAD+T Consulting GmbH
Gewerbepark 16
AT-4052 Ansfelden

www.cadt-solutions.com

Software for efficient planning of Lamello products


Cadwork

Cadwork SA
Route du Devin 2

CH-1623 Semsales

http://www.cadwork.com/indexL1a.jsp

2D / 3D CAD Software for the efficient planning of Lamello products

P-System connectors/machining

  • Connector and profile groove for Clamex P-14, Medius P 14/10, P-10
  • Connector and profile groove for Tenso P-14
  • Connector and profile groove/hole for Tenso Divario P-18
  • The connector can be positioned individually
  • Visualisation in graphs

P-System generator for automatic positioning

  • Number of connectors and distribution
  • Choosing the right connector size
  • Positioning within the panel thickness
  • Assessing the interior angle
  • Visualisation in graphs
  • Surface connections 
  • 90° corner connections
  • Angle bisector mitres at a huge range of angles
  • Obtuse-angled mitres at a huge range of angles
  • From version 23
  • Data export as BTL / SAT / DXF

P-System machining

  • Triggering the macros provided by the CNC manufacturer
  • The macros on the CNC machine determine the possibilities
  • Machining possible with the P-System disc cutter

Cabineo connectors/machining 

  • Connector and machining for Cabineo 8 + 12 
  • as a triple hole
  • The connector can be positioned individually
  • Visualisation in graphs

Cabineo generator for automatic positioning

  • Number of connectors and distribution
  • Choosing the right connector size
  • Positioning within the panel thickness
  • Visualisation in graphs
  • Surface connections
  • 90° corner connections
  • From version 23
  • Data export as BTL / SAT / DXF
CNC Partnernetzwerk von Lamello AG

iFurn

iFurn GmbH
Planckstraße 24
DE-32052 Herford

www.ifurn.net

Product data services for furniture construction and manufacturing

  • Interface between the supplier and furniture builder
  • Cloud service tailored to the needs of the furniture industry
  • The supplied data can be used in online catalogues, configurators, and CAD/CAM solutions.

Data availability & quality

  • Supplies data including visualisation and machining information.
  • Only standardised, verified data from the supplier (manufacturer).
  • Integrated solutions, available for a wide range of software solutions*
  • Cloud availability, 24/7/365, always up-to-date

* based on software technology from imos AG


CNC Partnernetzwerk von Lamello AG

imos

imos AG
Planckstraße 24
DE-32052 Herford

www.imos3d.com

3D CAD software

P-System connectors/machining

  • Connector and profile groove for Clamex P-14, Medius P 14/10, P-10
  • Connector and profile groove for Tenso P-14
  • Connector and profile groove/hole for Tenso Divario P-18
  • The connector can be positioned individually
  • Visualisation in graphs

P-System generator for automatic positioning

  • Number of connectors and distribution
  • Choosing the right connector size
  • Positioning within the panel thickness
  • Assessing the interior angle
  • Visualisation in graphs
  • Surface connections
  • 90° corner connections
  • Angle bisector mitres at a huge range of angles
  • Obtuse-angled mitres at a huge range of angles
  • From imos iX 2017

P-System machining

  • Triggering the macros provided by the CNC manufacturer
  • The macros on the CNC machine determine the possibilities
  • Machining possible with the P-System disc cutter
  • Interface for Wop and ISO controls

Cabineo connectors/machining

  • Connector and machining for Cabineo 8 + 12
  • As a triple hole
  • The connector can be positioned individually
  • Visualisation in graphs

Cabineo generator for automatic positioning

  • Number of connectors and distribution
  • Choosing the right connector size
  • Positioning within the panel thickness
  • Visualisation in graphs
  • Surface connections
  • 90° corner connections
  • From imos iX 2017

Cabineo machining

  • The triple hole and counter-hole can be machined without a macro through the use of a post-processor
  • Interface for Wop and ISO controls
CNC Partnernetzwerk von Lamello AG

KCD

KCD Software
Unified Global Technologies
1252 Route 28
US-02664 South Yarmouth, MA

kcdsoftware.com

P-System

Integrated as of Version 10:

  • Clamex P-14
  • Tenso P-14

Cabineo

Integrated as of Version 10:

  • Cabineo 8
  • Cabineo 12
CNC Partnernetzwerk von Lamello AG

Lignocam

Lignocam Sa
Chemin de la Routiaz 8
CH-1806 St-Légier-La Chiésaz

www.lignocam.com

CAM software

P-System machining

  • Profile groove for P-10, P-14, Medius P-14/10, Divario P
  • Hole for Clamex P
  • The profile groove needs to be positioned individually
  • Interface with ISO controls

P-System machining made possible:

  • Surface connections
  • 90° corner connections
  • Angle bisector mitres at a huge range of angles
  • Obtuse-angled mitres at a huge range of angles
  • Machining possible with the P-System disc cutter

Cabineo machining

  • Machining as a triple hole or groove
  • No automatic counter-hole positioning
  • The machining needs to be positioned individually

NC-Hops

direkt cnc-systeme gmbh
Brühlweg 26
D-73553 Alfdorf- Bonholz

www.direkt.net

CAM software for efficient planning of Lamello products

P-System macros

  • Profile groove for P-10, P14, Medius P-14/10, Divario P
  • Drill hole for Clamex P
  • Profile groove must be individually positioned
  • Graphic illustration
  • Graphic simulation of machining
  • For use on Holzher, Biesse, SCM, Mack, Reichenbacher, from WoodWop 7 Homag, Weeke
  • From NC-Hops 5, partial functions
  • All functions from NC-Hops 7 (additional charge)

P-System enabled:

  • Surface connections
  • 90° corner connections
  • Bisecting mitres in a vast range of angles
  • Right-angled mitres in a vast range of angles
  • Machining possible with P-System disc cutter and shaft tool

Cabineo macros

  • Customer can store 3x hole in program memory


OS Datensysteme GmbH

OS Datensysteme GmbH
Am Erlengraben 5
DE-76275 Ettlingen

www.osd.de

ERP (Enterprise Resource Planning)

•    P-System connectors and Cabineo integrated in ERP

2D / 3D CAD Software

P-System Connector / Processing
•    Connector and profile groove for Clamex P-14, Medius P 14/10, P-10
•    Connector and profile groove for für Tesno P-14
•    Connector and profile groove for / Bohrung für Divario P-18
•    Visualisation in graphs

P-System generator for automatic positioning
•    Number of connectors and distribution
•    Positioning in the plate thickness 
•    Visualisation in graphs
•    90° corner connections
•    Bisecting mitres in a vast range of angles
•    Dull mites in various angles
•    From version 10.0

 P-system processing 
•    Control of the macros from the CNC manufacturer 
•    The macros on the CNC machine determines the possibilities
•    Machining is possible with P-System disc cutter 
•    Interface with Wop

Cabineo Connector / Processing
•    Connector and processing for Cabineo 8 + 12
•    As a 3-hole drill 
•    As a groove with an exterior contour
•    Visualisation in graphs


Cabineo Generator for automatic positioning
•    Number of connectors and distribution
•    Choice of correct connector size
•    Positioning in the plate thickness
•    Visualisation in graphs
•    90° corner connections
•    From version 10.0

Cabineo Processing:
•    Interface with Wop
 


CNC Partnernetzwerk von Lamello AG

Point Line

Borm Informatik AG

Schlagstrasse 135

Postfach 58

CH-6431 Schwyz


www.pointline.com

2D/3D CAD software

P-System connectors/machining

  • Connector and profile groove for Clamex P-14, Medius P 14/10, P-10
  • Connector and profile groove for Tenso P-14
  • Connector and profile groove/hole for Tenso Divario P-18
  • Visualisation in graphs
  • Connector integrated into an ERP solution from Borm
  • The connector needs to be positioned individually

P-System machining

  • Interface with Wop

 Cabineo connectors/machining

  • Connector and machining for Cabineo 8 + 12
  • The connector needs to be positioned individually
  • As a groove with an exterior contour
  • Visualisation in graphs

Cabineo machining:

  • Interface with Wop

rwdm

rwdm
René Wetzstein
alte Aescherstr. 25

CH-5615 Fahrwangen

www.rwdm.ch

Datenmanagement for carpenters 

  • Data build-up and hardware automation based on CAD + T
  • Database with over 1250 hardwar stores growing (as of March 2018)
    • >95% fully automatically generated in plan
    • CNC and ComNorm compatible (ComNorm across ERP)
  • Cabinet-, kitchen-, pedestal-, Beistoss- und Blenden-Model
    • Finished CNC programs also for custom-made products
    • Automatic parts list, hardware list

P-System, possibilities with CAD+T

  • Connector and profile groove for Clamex P-14, Medius P 14/10, P-10
  • Connector and profile groove for für Tesno P-14
  • Connector and profile groove for / Bohrung für Divario P-18
  • Connector can be positioned individually
  • Automatic positioning possible
  • The CNC machine determines the processing options
  • Parts list possible

Cabineo, possibilities with CAD+T

  • Connector and machining for Cabineo 8 + 12
  • Covercap for Cabineo
  • As a triple hole
  • As a groove with an exterior contour
  • The connector can be positioned individually
  • Automatic positioning possible
  • The CNC machine determines the processing options
  • Parts list possible
CNC Partnernetzwerk von Lamello AG

Swiss all CAD

Swiss All CAD AG
Widenstrasse 2
CH-9200 Gossau

www.swissallcad.ch

Software for efficient planning of Lamello products

tapio

tapio GmbH
Landsberger Strasse 302
DE-80687 München

www.tapio.one

tapio is intended to help the wood industry to evolve into the digital future itself. A common ecosystem is tapio’s answer to the question “how”. Through tapio companies themselves can shape their digital future.

With tapio machinery manufacturers, toolmakers and material producer use the same technology platform. That way digital solutions for common customers of every size are being discovered. Tapio itself is neutral within this network and considers itself to be a supporter. Customers have the advantage that they rediscover the diversity of their physical world within solutions tapio provides.

CNC Partnernetzwerk von Lamello AG

TopSolid

Missler Software
254 L’Occitane
FR-31670 Labège

www.topsolid.com

3D CAD-CAM software for efficient planning of Lamello products

P-System connector/Machining

  • Connector and profile groove for Clamex P-14, Medius P 14/10, P-10
  • Connector and profile groove for Tenso P-14
  • Connector and profile groove/Drill hole for Divario P-18
  • Connector and profile groove for Bisco P-14, P-10
  • Connector must be individually positioned
  • Graphic illustration
  • Graphic simulation of machining
  • Available for WOP and ISO controller
  • From version 2013

P-System machining

  • Macros enabled by CNC manufacturer
  • The macros on the CNC machine determine the options
  • Machining is possible with the P-System disc cutter

 Cabineo connector/machining

  • Connector and machining for Cabineo 8 + 12
  • Connector must be individually positioned
  • Graphic illustration
  • Graphic simulation of machining
  • Available for WOP and ISO controller
  • From 2017 version

Cabineo machining:

  • Macros enabled by CNC manufacturer
  • Macros on the CNC machine define the options

CNC Partnernetzwerk von Lamello AG

TrunCAD

TrunCAD GmbH
Stegmühlenweg 1
DE-88131 Lindau

www.truncad.de

CAM software for efficient planning of Lamello products

P-System Machining

  • Macros enabled by CNC manufacturer
  • Macros on the CNC machine defines the options
  • Profile groove must be positioned individually
  • From version 11 (2015)
  • Can be purchased with update

Cabineo machining

  • Machining as 3x hole
  • Automatic positioning of counterbore
  • Machining must be positioned individually
  • From 2017 version
  • Available free with update