Lamello 
- [Alt + 0] - Startseite
- [Alt + 1] - Navigation
- [Alt + 2] - Inhalt
- [Alt + 3] - Kontakt
- [Alt + 4] - Sitemap
- [Alt + 5] - Suche
Installation
1. Choice of the joiners
The 12 mm joiners are generally preferred to the 8 mm joiners. The tightening force of the 12 mm joiner is approx. three times larger than the 8 mm joiner.
2. Positioning
The closer the joiner is placed to the surface, the higher the resulting
tightening force. Choose the smallest possible distance between
the joiners and the power actuator. The middle of the joiner must not
be positioned further than 20 mm from the surface.
Technical data sheet
3. Holes
Fitting of Invis fasteners requires clean and accurately aligned drill
holes (as for dowels) in the two work pieces to be joined. All stationary
machines used to drill dowel holes are suitable.
4. Inserting of the joiners
The Invis fasteners are screwed into the drill hole exactly perpendicular
by means of the mounting gauge.
Invis Installation
5. Inserting of the studs
The Invis studs are screwed into the drill hole exactly perpendicularly by
means of the mounting gauge.
6. Tightening the connection
Position elements and place the Invis power actuator parallel to the
joiner axis. Keep the switch pressed until a clear knocking sound indicates
tightening of the joiner. Let the joint knock for approx. 10 sec. to
ensure a perfect tension between the work pieces.
Invis Film - 3D