Lamello 
- [Alt + 0] - Startseite
- [Alt + 1] - Navigation
- [Alt + 2] - Inhalt
- [Alt + 3] - Kontakt
- [Alt + 4] - Sitemap
- [Alt + 5] - Suche
Zufällig ausgewähltes Bild.
Locking bolt PinLock
The locking bolt PinLock consists of a plastic bolt, which is in a brass bush and can be pre- and backturning. The PinLock would be pushed down in a 8 mm drill hole and will be used like the other Invis products with the MiniMag.
The difference between the other Invis joiners is, that the locking bolt PinLock couldn`t put a strain on tensile, but on shear forces.
Aesthetic and detachable
- Always detachable, quick and safe fastening
- Top aesthetics - No visible connectors
Economic
- Low cost product
- Only the MiniMag is necessary - good start to the Invis system with low cost investment
- Drilling are standard processing - fast in the work shop
- Complete prefabrication is possible - minimal time of montage on site
Safe and versatile
- lateral tolerance in the oposite groove for easy assemble
- For wood and wood composites
Example: Ceiling panelling
- 1. Lift the ceiling panel with the retracted PinLock up between the beams
- 2. Drive out the PinLock with the MiniMag* onto the metal profile
Example: Wall panelling
- 1. Insert detachable panel with retracted PinLock
- 2. Drive out the PinLock with the MiniMag* into the opposite groove
