Furniture connector without edge drilling
Holz verbinden


The Cabineo is a one-piece cabinet unit fitting and is installed into a drilled or routed shape. No edge drilling is necessary - the machining happens solely in the surface. Due to this, Cabineo can be used with all kinds of CNC machines, including very simple 3 axis and nesting machines. In comparison with the standard cam and dowel fitting, the Cabineo offers more efficient production, faster installation and a higher clamping force. To top it off, there is no need for wooden dowels. The concept of the fitting was designed to use a minimal amount of resources for a maximum of functionality. The Cabineo offers considerate advantages in the whole process, including production, transport and installation. Installing the fitting into the workpieces and stacking them during the production process is possible without any protruding parts, which could damage the finished surfaces. This eliminates the packing of bags with fittings which would need to be delivered to the job site for installation. Because the elements are already factory-installed, the person assembling doesn't need to handle loose fittings supplied in a bag during installation. This speeds up the assembly considerably and additionaly helps in reducing possible mistakes. The fitting is inserted into the routed shape on the surface. This can take place in production prior to transport or following transport at the final destination. The preinstalled screw inside the fitting is then screwed into the 5mm drill hole in the corresponding workpiece, using a ball-end allen key. The speed of the cordless drill joins the workpieces quickly and powerfully. Cover caps in various colours are also available and can be clipped onto the Cabineo within seconds.

Buy product

Cabineo Starter Set
  • Cabineo 8 + 12 (40 pcs each)
  • Cabineo hex bit
  • Cover caps (40 pcs)

Cabineo 8, for dividing panels from 16 mm, 500 pcs

Cabineo 8, for dividing panels from 16 mm, 2000 pcs

Cabineo 12, 500 pcs

Cabineo 12, 2000 pcs

Cabineo hex bit

Cabineo drill Ø 15 mm with short centering point 0.8 mm

Cabineo cutter Ø 10 mm

Cabineo cutter Ø 12 mm

Cabineo tool with handle

Product information

For all CNC machines

Surface machining without addtional drill holes in the edge for wooden dowels. Therefore the maching is possible on simple 3 axis CNC machines also.

Drilling or cutting

The workpiece can be machined either using a drill or a cutter.

Reduced to the essentials

The one-part connector features high clamping force and does not require any additional alignment elements such as wood dowels.

Technical information

Size (mm):
33.8 x 16.5 x 10.8 mm
ø 12 mm or smaller
ø 5 mm and ø 15 mm
Material connector:
Fibreglass reinforced plastic
Installation tolerance:
Longitudinal ± 0.1 mm
Tensile strength:
~ 900 N ≈ 90 kg

Corresponding system products

Cabineo tool with handle

For connecting the workpieces by hand

Wishlist add/remove

Cabineo hex bit

For connecting the workpieces with the cordless screwdriver

Wishlist add/remove

Cabineo Cover caps

Aesthetic with cover caps in various colors

Read more

Cabineo cutter Ø 10 mm

To machining the Cabineo with a cutter

Wishlist add/remove

Cabineo Cutter Ø 12 mm

To machining the Cabineo with a cutter

Wishlist add/remove

Cabineo drill Ø 15 mm

To machining the Cabineo with a drill

Wishlist add/remove