Lamello
Verbindungstechnik
Lamello

Planning and processing partners

From construction and planning to cutting tools and machining using a CNC

Efficient P-System use is supported by these partner companies:

2020 Logo

2020

2020 Technologies
323 Chemin des Plaines
FR-06372 Mouans-Sartoux

www.2020spaces.com

Alphacam Logo

Alphacam

Vero Software GmbH
Borchersstraße 20
DE-52072 Aachen

www.licom-alphacam.com

CAM software for efficient planning of Lamello products

P-System macros

  • Profile groove for P-10 and P14
  • Graphic illustration
  • Graphic simulation of machining
  • Profile groove must be positioned individually
  • Free download: P-System Macro
  • Tested for WOP and ISO controller

P-System macro enables:

  • Surface connections
  • 90° corner connections
  • Bisecting mitres in a vast range of angles
  • Right-angled mitres in a vast range of angles
  • Machining possible with P-System disc cutter and shaft tool

Cabineo Macros

  • Machining as 3x drill holes or cuts
  • Graphic illustration
  • Graphic simulation of machining
  • No automatic positioning of counterbore
  • Machining must be positioned individually
  • Free download


Atemag Logo

ATEMAG

ATEMAG Aggregattechnologie
Mühlenmatten 2
DE-77716 Hofstetten

www.atemag.de

Aggregates for groove cutting, drilling and milling for use of Lamello products

 VERTINEO FUNCTION LINE Aggregate For Machining of Cabineo Drilling Holes. More information on the ATEMAG website.

YouTube Video



Biesse Logo

Biesse

Biesse S.p.A.
Via della Meccanica 16
IT-61122 Pesaro (PU)
Italien


www.biesse.com

P-System components

  • Components enabled by Biesse Service: supportbiesse.com
  • Possible from NC-Hops 5.6 upwards (software version in DE, AT, CH)
  • Possible from bSolid 2.5 (6/2015) upwards (software version in all other countries)
  • Possible on 4 or 5-axle machines
  • Machining with bSolid is only possible with the P-System disc cutter
  • Machining with NC-Hops is possible with P-System disc cutter and shaft tool
  • Shaft tool can only be used on 5-axle machines

P-System component enables:

  • Surface connections
  • 90° corner connections
  • Bisecting mitres in a vast range of angles
  • Right-angled mitres in a vast range of angles

P-System tool pack

  • In certain markets, a specific P-System tool pack is available with free connectors. Information on this is available from your Biesse distributor

Cabinet Vision Logo

Cabinet Vision

Vero Software Limited
3800 Palisades Drive
US-35405 Tuscaloosa, AL

www.cabinetvision.com

P-System

Integrated as of Version 10:

  • Clamex P-14
  • Clamex P-10
  • Clamex P-14-10 Medius
  • Tenso P-14
  • Divario P-18

The following joints are possible: butt joints, end to end and mitres in all angles

Cabineo

Integrated as of Version 10:

  • Cabineo 8
  • Cabineo 12
CAD+T Logo

CAD+T

CAD+T Consulting GmbH
Gewerbepark 16
AT-4052 Ansfelden

www.cadt-solutions.com

Software for efficient planning of Lamello products


Cadwork Logo

Cadwork

Cadwork SA
Route du Devin 2

CH-1623 Semsales

http://www.cadwork.com/indexL1a.jsp

2D / 3D CAD Software for the efficient planning of Lamello products

P-System connectors/machining

  • Connector and profile groove for Clamex P-14, Medius P 14/10, P-10
  • Connector and profile groove for Tenso P-14
  • Connector and profile groove/hole for Tenso Divario P-18
  • The connector can be positioned individually
  • Visualisation in graphs

P-System generator for automatic positioning

  • Number of connectors and distribution
  • Choosing the right connector size
  • Positioning within the panel thickness
  • Assessing the interior angle
  • Visualisation in graphs
  • Surface connections 
  • 90° corner connections
  • Angle bisector mitres at a huge range of angles
  • Obtuse-angled mitres at a huge range of angles
  • From version 23
  • Data export as BTL / SAT / DXF

P-System machining

  • Triggering the macros provided by the CNC manufacturer
  • The macros on the CNC machine determine the possibilities
  • Machining possible with the P-System disc cutter

Cabineo connectors/machining 

  • Connector and machining for Cabineo 8 + 12 
  • as a triple hole
  • The connector can be positioned individually
  • Visualisation in graphs

Cabineo generator for automatic positioning

  • Number of connectors and distribution
  • Choosing the right connector size
  • Positioning within the panel thickness
  • Visualisation in graphs
  • Surface connections
  • 90° corner connections
  • From version 23
  • Data export as BTL / SAT / DXF

Format 4 Logo

Format 4

Felder KG
KR-Felder-Strasse 1
AT-6060 Hall in Tirol
Österreich

www.felder-group.com

P-System component

  • From Woodflash 3.0, pre-installed on 4 or 5-axle machine
  • Components enabled by Format4 service or team viewer
  • Machining is enabled by the P-System disc cutter and shaft tool

P-System component enables:

  • Surface connections
  • 90° corner connections
  • Bisecting mitres in a vast range of angles
  • Right-angled mitres in a vast range of angles

P-System tool pack

  • Information on the specific P-System tool pack with free connectors is available from your Format4 distributor

Cabineo components

  • Available from a Format4 distributor

Grotefeld Logo

Grotefeld

Grotefeld GmbH
Eugen-Gerstenmaier-Straße 1
DE-32339 Espelkamp

www.grotefeld.com

Aggregates for groove cutting, drilling and milling for use of Lamello products

HOLZ-HER

HOLZ-HER GmbH
Plochinger Strass 65
DE-77622 Nürtingen

www.holzher.de

HOLZ-HER: "Smart factory solution for nesting" 

  • CAD or CAM data from third parties can be imported with the planning software interface
  • The CabinetSelect software tool contains 400 ready-to-produce cabinet units that can be quickly and easily adapted to customer requirements on the machine
  • When it comes to connection methods, for example, Clamex P-14 or Cabineo can be selected and the required machining can be generated automatically
  • CabinetControl Pro planning software allows you to plan and configure built-in kitchens, knee wall and sloping roof cabinets and even complete room solutionsn
  • Better Nest generates the automatic nesting of nesting plans or optimised cutting plans, for example

Holz-Her GmbH Logo

HOLZ-HER

HOLZ-HER GmbH
Plochinger Strasse 65
DE-77622 Nürtingen

holzher.de

P-System components

  • Integrated from NC-Hops 5.0 upwards with Connect pack (5/2016)
  • An option on 4 or 5-axle machines
  • Machining is possible with the P-System disc cutter and shaft tool
  • Shaft tool can only be used on 5-axle machines

P-System component enables:

  • Surface connections
  • 90° corner connections
  • Bisecting mitres in a vast range of angles
  • Right-angled mitres in a vast range of angles

P-System and Cabineo components for Nextec

  • From HOPS 7 and the “BetterNest” software
  • The “Cabinet Control Base Module” Cabinet generator includes connection options with Clamex P and Cabineo
  • Clamex P “round pocket cutter” cover from the HOLZ-HER distribution partner

P-System tool pack

  • Connect pack with Lamello connector voucher, available from your Holzher distributor


Holzfraese

Holzfraese

CNC-Holzfraese
Am Luftschacht 3
DE-45886 Gelsenkirchen

www.cnc-holzfraese.de

P-System components

  • No direct cutting of P-System grooves
  • Macro for positioning bores for use with Zeta P2
  • Positioning pins or clips are inserted into the Zeta P2 groove cutter. Using the positioning bores, the Zeta P2 is placed in the correct spots and P-System grooves can be cut
  • Surface connections
  • 90° corner connections

Cabineo components

  • Cabineo 8+12
  • For milling the Cabineo machining


HOMAG Holzbearbeitungssysteme GmbH Logo

Homag

HOMAG Holzbearbeitungssysteme GmbH
Homagstrasse 3 – 5
DE-72296 Schopfloch


www.homag.com

P-System components: 

  • Installation enabled by Homag Service, modernization-schopfloch-cnchomag.com
  • Possible from Software Version WoodWOP 5.0 (Build 866)
  • Machining possible with the P-System disc cutter and shaft tool
  • Shaft tool can only be used on 5-axle machines

P-System component enables:

  • Surface connections
  • 90° corner connections
  • Bisecting mitres in a vast range of angles
  • Right-angled mitres in a vast range of angles


Homag cabinetCreator

HOMAG Holzbearbeitungssysteme GmbH
Homagstrasse 3 – 5
DE-72296 Schopfloch


www.homag.com

Homag cabinetCreator:

  • Furniture configurator and interface to WoodWOP
  • App for every device with an Internet browser
  • 3D CAD with 2D display
  • A selection of predefined basic shapes can be used in the design
  • The iFurn cloud service can be used to import and use fitting data, e.g. for the Lamello P-System connectors and Cabineo
  • The generated data can be transferred directly to Homag WoodWOP, cutting or nesting programs 

Vidoeo-Tutorial Software cabinetCreator (YouTube Link)

HSD SpA Logo

HSD

HSD SpA
Piazzale Alfio de Simoni s/n
IT-61122 Pesaro

www.hsd.it

Aggregates for groove cutting, drilling and milling for use of Lamello products


ifurn Logo

iFurn

iFurn GmbH
Planckstraße 24
DE-32052 Herford

www.ifurn.net

Product data services for furniture construction and manufacturing

  • Interface between the supplier and furniture builder
  • Cloud service tailored to the needs of the furniture industry
  • The supplied data can be used in online catalogues, configurators, and CAD/CAM solutions.

Data availability & quality

  • Supplies data including visualisation and machining information.
  • Only standardised, verified data from the supplier (manufacturer).
  • Integrated solutions, available for a wide range of software solutions*
  • Cloud availability, 24/7/365, always up-to-date

* based on software technology from imos AG


IMA Schelling Deutschland GmbH Logo

IMA

IMA Schelling Deutschland GmbH
Industriestraße 3
DE-32312 Lübbecke

www.ima.de

P-System components

  • From IMA WOP 8.0 from 2015, pre-installed on 4 or 5-axle machines
  • A macro is available for IMA WOP 6.0 from 2014
  • Components enabled by IMA Service
  • Machining possible with the P-System disc cutter and shaft tool
  • Shaft tool can only be used on 5-axle machines

P-System component enabled:

  • Surface connections
  • 90° corner connections
  • Bisecting mitres in a vast range of angles
  • Right-angled mitres in a vast range of angles

imos Logo

imos

imos AG
Planckstraße 24
DE-32052 Herford

www.imos3d.com

3D CAD software

P-System connectors/machining

  • Connector and profile groove for Clamex P-14, Medius P 14/10, P-10
  • Connector and profile groove for Tenso P-14
  • Connector and profile groove/hole for Tenso Divario P-18
  • The connector can be positioned individually
  • Visualisation in graphs

P-System generator for automatic positioning

  • Number of connectors and distribution
  • Choosing the right connector size
  • Positioning within the panel thickness
  • Assessing the interior angle
  • Visualisation in graphs
  • Surface connections
  • 90° corner connections
  • Angle bisector mitres at a huge range of angles
  • Obtuse-angled mitres at a huge range of angles
  • From imos iX 2017

P-System machining

  • Triggering the macros provided by the CNC manufacturer
  • The macros on the CNC machine determine the possibilities
  • Machining possible with the P-System disc cutter
  • Interface for Wop and ISO controls

Cabineo connectors/machining

  • Connector and machining for Cabineo 8 + 12
  • As a triple hole
  • The connector can be positioned individually
  • Visualisation in graphs

Cabineo generator for automatic positioning

  • Number of connectors and distribution
  • Choosing the right connector size
  • Positioning within the panel thickness
  • Visualisation in graphs
  • Surface connections
  • 90° corner connections
  • From imos iX 2017

Cabineo machining

  • The triple hole and counter-hole can be machined without a macro through the use of a post-processor
  • Interface for Wop and ISO controls
InfoTEC CNC Logo

InfoTec

InfoTEC CNC

Zasutowo Kròtka 8
PL-62-330 Nekla

www.infotec-cnc.com

P-System components

  • Machining from CAM-Software or G-Code 
  • Machining possibilities and limits depend of the CAD/CAM-System 
  • CAD _ CAM _ postprocessor (info Tec) _ TPA control CNC
  • CAD _ CAM _ postprocessor (info Tec) _ InfoCAM control CNC
  • Software compatibility with TopSolid, Corpus, Solid Works SWOOD, Cobus
  • Machining possible with the P-System disc cutter

P-System component enables:

  • 90° corner connections
  • Midwall connections
  • Bisecting mitres in a vast range of angles

Process for Cabineo

  • Same principle as described above (P-system processing)
  • Machining 3x drill holes with drill

KCD Software Logo

KCD

KCD Software
Unified Global Technologies
1252 Route 28
US-02664 South Yarmouth, MA

kcdsoftware.com

P-System

Integrated as of Version 10:

  • Clamex P-14
  • Tenso P-14

Cabineo

Integrated as of Version 10:

  • Cabineo 8
  • Cabineo 12
Komo Machine Inc Logo

Komo

Komo Machine Inc
One Komo Drive
US-08701 Lakewood, New Jersey

https://komo.com

P-System component

  • Clamex P-14
  • Clamex P-10
  • Clamex P-14-10 Medius
  • Tenso P-14
  • Divario P-18
  • Machining is possible with the P-System disc cutter as well as with the shank tool
  • The shank tool can only be used on 5-axis machines

P-System component allows:

  • Surface joints
  • 90° corner joints
  • Miters in various angles
  • Butt joints in various angles

 Cabineo

  • Cabineo 8
  • Cabineo 12

    Leitz Logo

    Leitz

    Leitz GmbH & Co. KG
    Leitzstrasse 2
    DE-73447 Oberkochen

    www.leitz.org

    Tools for groove cutting, drilling and milling for use of Lamello products

    Leuco Logo

    LEUCO

    LEUCO Ledermann GmbH & Co. KG
    Willi-Ledermann-Straße 1
    DE-72160 Horb am Neckar

    www.leuco.com

    Tools for groove cutting, drilling and milling for use of Lamello products

    Lignocam SA Logo

    Lignocam

    Lignocam Sa
    Chemin de la Routiaz 8
    CH-1806 St-Légier-La Chiésaz

    www.lignocam.com

    CAM software

    P-System machining

    • Profile groove for P-10, P-14, Medius P-14/10, Divario P
    • Hole for Clamex P
    • The profile groove needs to be positioned individually
    • Interface with ISO controls

    P-System machining made possible:

    • Surface connections
    • 90° corner connections
    • Angle bisector mitres at a huge range of angles
    • Obtuse-angled mitres at a huge range of angles
    • Machining possible with the P-System disc cutter

    Cabineo machining

    • Machining as a triple hole or groove
    • No automatic counter-hole positioning
    • The machining needs to be positioned individually

    Masterwood Logo

    Masterwood

    Masterwood s.p.a.
    Via Romania 18/20
    IT-47921 Rimini

    www.masterwood.com

    P-System components

    • Components enabled by Masterwood Service
    • Possible from Masterwork 2015 with Beckhoff controller
    • Machining possible on 4 or 5-axle machines
    • Machining with P-System disc cutter and shaft tool
    • Shaft tool can only be used on 5-axle machines

    P-System component enables:

    • Surface connections
    • 90° corner connections
    • Bisecting mitres in a vast range of angles
    • Right-angled mitres in a vast range of angles

     P-System tool pack

    •  In certain markets, a specific P-System tool pack is available with free connectors. Information on this is available from your Masterwood distributor

    Morbidelli SCM Group spa Logo

    Morbidelli

    SCM Group spa
    Via Emilia 71
    IT-47900 Rimini


    www.scmgroup.com

    P-System components 

    • Possible for 5-axle machines, from Xilog Plus 01.14.026
    • Possible for 4 and 5-axle machines, from Maestro 1.00.011 upwards
    • Installation of components by Morbidelli Service
    • Machining possible with P-System disc cutter

    P-System component enables:

    • Surface connections
    • 90° corner connections
    • Bisecting mitres in a vast range of angles
    • Right-angled mitres in a vast range of angles

    NC-Hops diekt cnc-systeme gmbh Logo

    NC-Hops

    direkt cnc-systeme gmbh
    Brühlweg 26
    D-73553 Alfdorf- Bonholz

    www.direkt.net

    CAM software for efficient planning of Lamello products

    P-System macros

    • Profile groove for P-10, P14, Medius P-14/10, Divario P
    • Drill hole for Clamex P
    • Profile groove must be individually positioned
    • Graphic illustration
    • Graphic simulation of machining
    • For use on Holzher, Biesse, SCM, Mack, Reichenbacher, from WoodWop 7 Homag, Weeke
    • From NC-Hops 5, partial functions
    • All functions from NC-Hops 7 (additional charge)

    P-System enabled:

    • Surface connections
    • 90° corner connections
    • Bisecting mitres in a vast range of angles
    • Right-angled mitres in a vast range of angles
    • Machining possible with P-System disc cutter and shaft tool

    Cabineo macros

    • Customer can store 3x hole in program memory


    Oertli Logo

    OERTLI

    Oertli Werkzeuge AG
    Hofstrasse 1
    CH-8181 Höri

    www.oertli.com

    Tools for groove cutting, drilling and milling for use of Lamello products

    OS Datensysteme GmbH Logo

    OS Datensysteme GmbH

    OS Datensysteme GmbH
    Am Erlengraben 5
    DE-76275 Ettlingen

    www.osd.de

    ERP (Enterprise Resource Planning)

    •    P-System connectors and Cabineo integrated in ERP

    2D / 3D CAD Software

    P-System Connector / Processing
    •    Connector and profile groove for Clamex P-14, Medius P 14/10, P-10
    •    Connector and profile groove for für Tesno P-14
    •    Connector and profile groove for / Bohrung für Divario P-18
    •    Visualisation in graphs

    P-System generator for automatic positioning
    •    Number of connectors and distribution
    •    Positioning in the plate thickness 
    •    Visualisation in graphs
    •    90° corner connections
    •    Bisecting mitres in a vast range of angles
    •    Dull mites in various angles
    •    From version 10.0

     P-system processing 
    •    Control of the macros from the CNC manufacturer 
    •    The macros on the CNC machine determines the possibilities
    •    Machining is possible with P-System disc cutter 
    •    Interface with Wop

    Cabineo Connector / Processing
    •    Connector and processing for Cabineo 8 + 12
    •    As a 3-hole drill 
    •    As a groove with an exterior contour
    •    Visualisation in graphs


    Cabineo Generator for automatic positioning
    •    Number of connectors and distribution
    •    Choice of correct connector size
    •    Positioning in the plate thickness
    •    Visualisation in graphs
    •    90° corner connections
    •    From version 10.0

    Cabineo Processing:
    •    Interface with Wop
     


    Pinncalc

    PinnCalc

    PinnCalc GmbH
    Norderstraße 8
    DE-24340 Eckernförde

    www.p-s-s.de

    PinnCalc «Software & Service ganz nach Bedarf»

    • Die ERP-Software P123 Corpora deckt alle relevanten Arbeitsschritte in der Auftragsabwicklung vom Angebot bis zum Zahlungseingang ab
    • Es wird eine auf die Kundenbedürfnisse zugeschnittene individuelle Lösung umgesetzt
    • Die ERP Software umfasst eine Vollintegration von TrunCAD und Top Solid und beinhaltet Schnittstellen zu der CAD Software von Cobus NCAD, imos, PaletteCAD, Pytha, SmartWOP und VectorWorks
    • Die P-System Verbinder, die 4mm Holzlamellen oder der Lamello Cabineo werden aus der CAD Software ins ERP übernommen und stehen dann zur Verfügung, bzw. werden zugeordnet
    • Die CAD/CAM P305 Software ist die Schnittstelle zu allen gängigen CNC Programmier-Systemen wie WoodWOP, NC-HOPS, Maestro, XILOG, TPA, Genesis, Gannomat Editor, Masterworks, NCAD /xml, IMAWop /xml, Biesse Works

    PointLineCAD

    BORM-INFORMATIK AG
    Schlagstrasse 135
    Postfach 58
    CH-6431 Schwyz

    www.pointline.swiss

    2D/3D CAD software

    P-System connectors/machining

    • Connector and profile groove for Clamex P-14, Medius P 14/10, P-10
    • Connector and profile groove for Tenso P-14
    • Connector and profile groove/hole for Tenso Divario P-18
    • Visualisation in graphs
    • Connector integrated into an ERP solution from Borm
    • The connector needs to be positioned individually

    P-System machining

    • Interface with Wop

     Cabineo connectors/machining

    • Connector and machining for Cabineo 8 + 12
    • The connector needs to be positioned individually
    • As a groove with an exterior contour
    • Visualisation in graphs

    Cabineo machining:

    • Interface with Wop

    PYTHA Lab GmbH Logo

    Pytha

    PYTHA Lab GmbH
    Inselstr. 3
    DE-63743 Aschaffenburg

    www.pytha.com

    3D CAD Software

    P-System connectors / machining

    • Connector and profile groove for Clamex P-14, Medius P 14/10, P-10
    • Connector and profile groove for Tenso P-14
    • Connector and profile groove/hole for Tenso Divario P-18
    • Visualisation in graphs

    P-System generator for automatic positioning

    • Number of connectors and distribution
    • Positioning in the plate thickness
    • Visualisation in graphs
    • Surface connections
    • 90° corner connections
    • Angle bisector mitres 2x45°
    • From version 24

    P-System machining

    • Triggering the macros provided by the CNC manufacturer
    • The macros on the CNC machine determine the possibilities
    • Machining possible with the P-System disc cutter
    • Interface for Wop

    Cabineo connectors/machining

    • Connector and machining for Cabineo 8 + 12
    • As a triple hole
    • The connector can be positioned individually
    • Visualisation in graphs

    Cabineo generator for automatic positioning

    • Positioning within the panel thickness
    • Visualisation in graphs
    • 90° corner connections
    • From version 23
    rwdm Logo

    rwdm

    rwdm
    René Wetzstein
    alte Aescherstr. 25

    CH-5615 Fahrwangen

    www.rwdm.ch

    Datenmanagement for carpenters 

    • Data build-up and hardware automation based on CAD + T
    • Database with over 4'000 hardware stores growing (as of April 2020)
      • >95% fully automatically generated in plan
      • CNC and ComNorm compatible (ComNorm across ERP)
    • Cabinet-, kitchen-, pedestal-, Beistoss- und Blenden-Model
      • Finished CNC programs also for custom-made products
      • Automatic parts list, hardware list

    P-System, possibilities with CAD+T

    • Connector and profile groove for Clamex P-14, Medius P 14/10, P-10
    • Connector and profile groove for für Tenso P-14/10
    • Connector and profile groove for / Bohrung für Divario P-18
    • Connector can be positioned individually
    • Automatic positioning possible
    • The CNC machine determines the processing options
    • Parts list possible

    Cabineo, possibilities with CAD+T

    • Connector and machining for Cabineo 8 + 12
    • Covercap for Cabineo
    • As a triple hole
    • As a groove with an exterior contour
    • The connector can be positioned individually
    • Automatic positioning possible
    • The CNC machine determines the processing options
    • Parts list possible
    SCM Group spa Logo

    SCM Group

    SCM Group spa
    Via Emilia 71
    IT-47900 Rimini


    www.scmgroup.com

    P-System components 

    • Possible for 5-axle machines, from Xilog Plus 01.14.026
    • Possible for 4 and 5-axle machines, from Maestro 1.00.011
    • Installation of components by SCM Service
    • Machining possible with P-System disc cutter and shaft tool
    • Use of the shaft tool is only possible on 5-axle machines

    P-System component enabled:

    • Surface connections
    • 90° corner connections
    • Bisecting mitres in a vast range of angles
    • Right-angled mitres in a vast range of angles

    SmartWOP

    SmartWOP
    Tibek CNC-Technik GmbH
    Gutenbergstrasse 39
    DE-40235 Düsseldorf


    www.smartwop.de

    SmartWOP: "Clever, simple and fast" 

    • 3D CAD, cabinet unit generator and has interfaces to ERP programs and WOP
    • SmartWOP makes it possible to design furniture very quickly, both as a single order and as a series order, using drag-and-drop
    • The P-System connectors, the 4 mm wooden biscuits and the Lamello Cabineo are stored in the fittings and machining library and are automatically positioned to the depth and thickness of the connection
    • The CNC connection is used to export the designs as finished CNC programs for the CNC machines
    • Special volumes are available for knee wall cabinet, jamb wall cabinet and corner cabinet applications

    Spazio 3D

    BrainSoftware srl
    Via Roma 25/a
    IT-31010 Fonte TV

    www.spazio3d.com

    3D CAD-CAM Software for efficient planning of Lamello products

    P-System connector / machining

    • Connector and profile groove for Clamex P-14, Medius P 14/10, P-10
    • Connector and profile groove for Tenso P-14
    • Connector and profile groove/drill hole for Divario P-18
    •  Available for WOP and ISO controller

    P-System generator for automatic positioning

    • Number of connectors
    • In the board thickness
    • Illustration

    P-System machining

    • Enabling of macros by CNC manufacturer
    • Macros on the CNC machine determine the options
    • Machining is possible with the P-System disc cutter

    Cabineo connector / Machining

    • Connectors and machining for Cabineo: 8 + 12
    • Available for WOP and ISO controller

    Cabineo generator for automatic positioning

    • Number of connectors
    • Illustration

    Cabineo machining

    • Macros enabled by CNC manufacturer


    Swiss all CAD AG Logo

    Swiss all CAD

    Swiss All CAD AG
    Widenstrasse 2
    CH-9200 Gossau

    www.swissallcad.ch

    Software for efficient planning of Lamello products

    Swood

    SWOOD
    EFICAD
    55 avenue de Melgueil
    FR-34280 La Grande Motte

    www.swood.eficad.com

    SWOOD by EFICAD: "Furniture software from design to manufacture"

    • SWOOD Design is a complete CAD software that is fully integrated into SOLIDWORKS
    • It makes it quick and easy to design a project in a 3D environment and parametric functions
    • The configurator works in a parametric 3D design using drag-and-drop
    • The P-System connectors, the 4mm wooden biscuits or the Lamello Cabineo, for example, can be automatically positioned in the depth and thickness of the connection according to parametrically defined rules from the fitting library
    • The SWOOD Center Service can be linked to the company's databases (e.g. ERP or MES software)
    • The design data can be controlled via SWOOD CAM using post-processors with 3- to 5-axis CNC machines (WOP and ISO interface)

    Tapio GmbH Logo

    tapio

    tapio GmbH
    Landsberger Strasse 302
    DE-80687 München

    www.tapio.one

    tapio is intended to help the wood industry to evolve into the digital future itself. A common ecosystem is tapio’s answer to the question “how”. Through tapio companies themselves can shape their digital future.

    With tapio machinery manufacturers, toolmakers and material producer use the same technology platform. That way digital solutions for common customers of every size are being discovered. Tapio itself is neutral within this network and considers itself to be a supporter. Customers have the advantage that they rediscover the diversity of their physical world within solutions tapio provides.

    TopSolid Missler Software Logo

    TopSolid

    Missler Software
    254 L’Occitane
    FR-31670 Labège

    www.topsolid.com

    3D CAD-CAM software for efficient planning of Lamello products

    P-System connector/Machining

    • Connector and profile groove for Clamex P-14, Medius P 14/10, P-10
    • Connector and profile groove for Tenso P-14
    • Connector and profile groove/Drill hole for Divario P-18
    • Connector and profile groove for Bisco P-14, P-10
    • Connector must be individually positioned
    • Graphic illustration
    • Graphic simulation of machining
    • Available for WOP and ISO controller
    • From version 2013

    P-System machining

    • Macros enabled by CNC manufacturer
    • The macros on the CNC machine determine the options
    • Machining is possible with the P-System disc cutter

     Cabineo connector/machining

    • Connector and machining for Cabineo 8 + 12
    • Connector must be individually positioned
    • Graphic illustration
    • Graphic simulation of machining
    • Available for WOP and ISO controller
    • From 2017 version

    Cabineo machining:

    • Macros enabled by CNC manufacturer
    • Macros on the CNC machine define the options

    Truncad Logo

    TrunCAD

    TrunCAD GmbH
    Stegmühlenweg 1
    DE-88131 Lindau

    www.truncad.de

    CAM software for efficient planning of Lamello products

    P-System Machining

    • Macros enabled by CNC manufacturer
    • Macros on the CNC machine defines the options
    • Profile groove must be positioned individually
    • From version 11 (2015)
    • Can be purchased with update

    Cabineo machining

    • Machining as 3x hole
    • Automatic positioning of counterbore
    • Machining must be positioned individually
    • From 2017 version
    • Available free with update

    Utensiltecnica Logo

    Utensiltecnica

    Utensiltecnica Srl
    Via Cà Giorgino 2
    IT-47837 San Pietro RN

    www.utensiltecnica.com

    Tools for groove cutting, drilling and milling for use of Lamello products

    Lamello Partner Vectorworks

    Vectorworks interiorcad

    extragroup GmbH
    Pottkamp 19
    DE-48149 Münster

    www.extragroup.de

    2D / 3D CAD Software

    CAM Software VectorWOP

    P-System Connector

    • Connector and profile groove for Clamex P-14, Medius P 14/10, P-10
    • Connector and profile groove for Tenso P-14
    • Visualisation in graphs

    P-System generator for automatic positioning 

    • Number of connectors and distribution
    • Positioning in the plate thickness
    • Visualisation in graphs
    • Surface connections
    • 90° corner connections
    • Angle bisector mitres at a huge range of angles
    • Obtuse-angled mitres at a huge range of angles
    • From version 2019

    P-System machining

    • Triggering the macros provided by the CNC manufacturer
    • The macros on the CNC machine determine the possibilities
    • Machining possible with the P-System disc cutter
    • Interface with WOP
    • NC-Export possible with CAM Software VectorWOP

    Cabineo connectors / machining

    • Connector and machining for Cabineo 8 + 12
    • As a triple hole
    • As a groove with an exterior contour
    • The connector can be positioned individually
    • Visualisation in graphs

    Cabineo generator for automatic positioning 

    • Number of connectors and distribution
    • Positioning within the panel thickness
    • Grafische Darstellung
    • 90° Eckverbindungen
    • Ab Version 2020

    Cabineo machining

    • Interface for WOP
    • NC-Export possible with CAM Software VectorWOP

    Vitap S.p.a. Logo

    Vitap S.p.a.

    Vitap S.p.a.
    Via Pisana n°149
    IT-53036 Poggibonsi (Siena)

    www.vitap.it

    P-System components

    • Integrated from software version Point K2 TOP 3.6.42
    • Possible for 4-axle machines
    • Machining possible with P-System disc cutter

    P-System component enables

    • 90° corner connections
    • Midwall connections

    Component for Cabineo

    • Integrated from software version Point K2 TOP 3.6.42
    • Possible for 3- and 4-axle machines

    Component for Cabineo enables

    • Machining 3x drill holes with drill or cutter