Lamello
Verbindungstechnik
Lamello

Planning and processing partners

From construction and planning to cutting tools and machining using a CNC

Efficient P-System use is supported by these partner companies:

2020 Logo

2020

2020 Technologies
323 Chemin des Plaines
FR-06372 Mouans-Sartoux

www.2020spaces.com

Alphacam Logo

Alphacam

Vero Software GmbH
Borchersstraße 20
DE-52072 Aachen

www.licom-alphacam.com

CAM software for efficient planning of Lamello products

P-System macros

  • Profile groove for P-10 and P14
  • Graphic illustration
  • Graphic simulation of machining
  • Profile groove must be positioned individually
  • Free download: P-System Macro
  • Tested for WOP and ISO controller

P-System macro enables:

  • Surface connections
  • 90° corner connections
  • Bisecting mitres in a vast range of angles
  • Right-angled mitres in a vast range of angles
  • Machining possible with P-System disc cutter and shaft tool

Cabineo Macros

  • Machining as 3x drill holes or cuts
  • Graphic illustration
  • Graphic simulation of machining
  • No automatic positioning of counterbore
  • Machining must be positioned individually
  • Free download


Cabinet Vision Logo

Cabinet Vision

Vero Software Limited
3800 Palisades Drive
US-35405 Tuscaloosa, AL

www.cabinetvision.com

P-System

Integrated as of Version 10:

  • Clamex P-14
  • Clamex P-10
  • Clamex P-14-10 Medius
  • Tenso P-14
  • Divario P-18

The following joints are possible: butt joints, end to end and mitres in all angles

Cabineo

Integrated as of Version 10:

  • Cabineo 8
  • Cabineo 12
CAD+T Logo

CAD+T

CAD+T Consulting GmbH
Gewerbepark 16
AT-4052 Ansfelden

www.cadt-solutions.com

Software for efficient planning of Lamello products


Cadwork Logo

Cadwork

Cadwork SA
Route du Devin 2

CH-1623 Semsales

http://www.cadwork.com/indexL1a.jsp

2D / 3D CAD Software for the efficient planning of Lamello products

P-System connectors/machining

  • Connector and profile groove for Clamex P-14, Medius P 14/10, P-10
  • Connector and profile groove for Tenso P-14
  • Connector and profile groove/hole for Tenso Divario P-18
  • The connector can be positioned individually
  • Visualisation in graphs

P-System generator for automatic positioning

  • Number of connectors and distribution
  • Choosing the right connector size
  • Positioning within the panel thickness
  • Assessing the interior angle
  • Visualisation in graphs
  • Surface connections 
  • 90° corner connections
  • Angle bisector mitres at a huge range of angles
  • Obtuse-angled mitres at a huge range of angles
  • From version 23
  • Data export as BTL / SAT / DXF

P-System machining

  • Triggering the macros provided by the CNC manufacturer
  • The macros on the CNC machine determine the possibilities
  • Machining possible with the P-System disc cutter

Cabineo connectors/machining 

  • Connector and machining for Cabineo 8 + 12 
  • as a triple hole
  • The connector can be positioned individually
  • Visualisation in graphs

Cabineo generator for automatic positioning

  • Number of connectors and distribution
  • Choosing the right connector size
  • Positioning within the panel thickness
  • Visualisation in graphs
  • Surface connections
  • 90° corner connections
  • From version 23
  • Data export as BTL / SAT / DXF

HOLZ-HER

HOLZ-HER GmbH
Plochinger Strass 65
DE-77622 Nürtingen

www.holzher.de

HOLZ-HER: "Smart factory solution for nesting" 

  • CAD or CAM data from third parties can be imported with the planning software interface
  • The CabinetSelect software tool contains 400 ready-to-produce cabinet units that can be quickly and easily adapted to customer requirements on the machine
  • When it comes to connection methods, for example, Clamex P-14 or Cabineo can be selected and the required machining can be generated automatically
  • CabinetControl Pro planning software allows you to plan and configure built-in kitchens, knee wall and sloping roof cabinets and even complete room solutionsn
  • Better Nest generates the automatic nesting of nesting plans or optimised cutting plans, for example

Homag cabinetCreator

HOMAG Holzbearbeitungssysteme GmbH
Homagstrasse 3 – 5
DE-72296 Schopfloch


www.homag.com

Homag cabinetCreator:

  • Furniture configurator and interface to WoodWOP
  • App for every device with an Internet browser
  • 3D CAD with 2D display
  • A selection of predefined basic shapes can be used in the design
  • The iFurn cloud service can be used to import and use fitting data, e.g. for the Lamello P-System connectors and Cabineo
  • The generated data can be transferred directly to Homag WoodWOP, cutting or nesting programs 

Vidoeo-Tutorial Software cabinetCreator (YouTube Link)

ifurn Logo

iFurn

iFurn GmbH
Planckstraße 24
DE-32052 Herford

www.ifurn.net

Product data services for furniture construction and manufacturing

  • Interface between the supplier and furniture builder
  • Cloud service tailored to the needs of the furniture industry
  • The supplied data can be used in online catalogues, configurators, and CAD/CAM solutions.

Data availability & quality

  • Supplies data including visualisation and machining information.
  • Only standardised, verified data from the supplier (manufacturer).
  • Integrated solutions, available for a wide range of software solutions*
  • Cloud availability, 24/7/365, always up-to-date

* based on software technology from imos AG


imos Logo

imos

imos AG
Planckstraße 24
DE-32052 Herford

www.imos3d.com

3D CAD software

P-System connectors/machining

  • Connector and profile groove for Clamex P-14, Medius P 14/10, P-10
  • Connector and profile groove for Tenso P-14
  • Connector and profile groove/hole for Tenso Divario P-18
  • The connector can be positioned individually
  • Visualisation in graphs

P-System generator for automatic positioning

  • Number of connectors and distribution
  • Choosing the right connector size
  • Positioning within the panel thickness
  • Assessing the interior angle
  • Visualisation in graphs
  • Surface connections
  • 90° corner connections
  • Angle bisector mitres at a huge range of angles
  • Obtuse-angled mitres at a huge range of angles
  • From imos iX 2017

P-System machining

  • Triggering the macros provided by the CNC manufacturer
  • The macros on the CNC machine determine the possibilities
  • Machining possible with the P-System disc cutter
  • Interface for Wop and ISO controls

Cabineo connectors/machining

  • Connector and machining for Cabineo 8 + 12
  • As a triple hole
  • The connector can be positioned individually
  • Visualisation in graphs

Cabineo generator for automatic positioning

  • Number of connectors and distribution
  • Choosing the right connector size
  • Positioning within the panel thickness
  • Visualisation in graphs
  • Surface connections
  • 90° corner connections
  • From imos iX 2017

Cabineo machining

  • The triple hole and counter-hole can be machined without a macro through the use of a post-processor
  • Interface for Wop and ISO controls
KCD Software Logo

KCD

KCD Software
Unified Global Technologies
1252 Route 28
US-02664 South Yarmouth, MA

kcdsoftware.com

P-System

Integrated as of Version 10:

  • Clamex P-14
  • Tenso P-14

Cabineo

Integrated as of Version 10:

  • Cabineo 8
  • Cabineo 12
Lignocam SA Logo

Lignocam

Lignocam Sa
Chemin de la Routiaz 8
CH-1806 St-Légier-La Chiésaz

www.lignocam.com

CAM software

P-System machining

  • Profile groove for P-10, P-14, Medius P-14/10, Divario P
  • Hole for Clamex P
  • The profile groove needs to be positioned individually
  • Interface with ISO controls

P-System machining made possible:

  • Surface connections
  • 90° corner connections
  • Angle bisector mitres at a huge range of angles
  • Obtuse-angled mitres at a huge range of angles
  • Machining possible with the P-System disc cutter

Cabineo machining

  • Machining as a triple hole or groove
  • No automatic counter-hole positioning
  • The machining needs to be positioned individually

NC-Hops diekt cnc-systeme gmbh Logo

NC-Hops

direkt cnc-systeme gmbh
Brühlweg 26
D-73553 Alfdorf- Bonholz

www.direkt.net

CAM software for efficient planning of Lamello products

P-System macros

  • Profile groove for P-10, P14, Medius P-14/10, Divario P
  • Drill hole for Clamex P
  • Profile groove must be individually positioned
  • Graphic illustration
  • Graphic simulation of machining
  • For use on Holzher, Biesse, SCM, Mack, Reichenbacher, from WoodWop 7 Homag, Weeke
  • From NC-Hops 5, partial functions
  • All functions from NC-Hops 7 (additional charge)

P-System enabled:

  • Surface connections
  • 90° corner connections
  • Bisecting mitres in a vast range of angles
  • Right-angled mitres in a vast range of angles
  • Machining possible with P-System disc cutter and shaft tool

Cabineo macros

  • Customer can store 3x hole in program memory


OS Datensysteme GmbH Logo

OS Datensysteme GmbH

OS Datensysteme GmbH
Am Erlengraben 5
DE-76275 Ettlingen

www.osd.de

ERP (Enterprise Resource Planning)

•    P-System connectors and Cabineo integrated in ERP

2D / 3D CAD Software

P-System Connector / Processing
•    Connector and profile groove for Clamex P-14, Medius P 14/10, P-10
•    Connector and profile groove for für Tesno P-14
•    Connector and profile groove for / Bohrung für Divario P-18
•    Visualisation in graphs

P-System generator for automatic positioning
•    Number of connectors and distribution
•    Positioning in the plate thickness 
•    Visualisation in graphs
•    90° corner connections
•    Bisecting mitres in a vast range of angles
•    Dull mites in various angles
•    From version 10.0

 P-system processing 
•    Control of the macros from the CNC manufacturer 
•    The macros on the CNC machine determines the possibilities
•    Machining is possible with P-System disc cutter 
•    Interface with Wop

Cabineo Connector / Processing
•    Connector and processing for Cabineo 8 + 12
•    As a 3-hole drill 
•    As a groove with an exterior contour
•    Visualisation in graphs


Cabineo Generator for automatic positioning
•    Number of connectors and distribution
•    Choice of correct connector size
•    Positioning in the plate thickness
•    Visualisation in graphs
•    90° corner connections
•    From version 10.0

Cabineo Processing:
•    Interface with Wop
 


Pinncalc

PinnCalc

PinnCalc GmbH
Norderstraße 8
DE-24340 Eckernförde

www.p-s-s.de

PinnCalc «Software & Service ganz nach Bedarf»

  • Die ERP-Software P123 Corpora deckt alle relevanten Arbeitsschritte in der Auftragsabwicklung vom Angebot bis zum Zahlungseingang ab
  • Es wird eine auf die Kundenbedürfnisse zugeschnittene individuelle Lösung umgesetzt
  • Die ERP Software umfasst eine Vollintegration von TrunCAD und Top Solid und beinhaltet Schnittstellen zu der CAD Software von Cobus NCAD, imos, PaletteCAD, Pytha, SmartWOP und VectorWorks
  • Die P-System Verbinder, die 4mm Holzlamellen oder der Lamello Cabineo werden aus der CAD Software ins ERP übernommen und stehen dann zur Verfügung, bzw. werden zugeordnet
  • Die CAD/CAM P305 Software ist die Schnittstelle zu allen gängigen CNC Programmier-Systemen wie WoodWOP, NC-HOPS, Maestro, XILOG, TPA, Genesis, Gannomat Editor, Masterworks, NCAD /xml, IMAWop /xml, Biesse Works

PointLineCAD

BORM-INFORMATIK AG
Schlagstrasse 135
Postfach 58
CH-6431 Schwyz

www.pointline.swiss

2D/3D CAD software

P-System connectors/machining

  • Connector and profile groove for Clamex P-14, Medius P 14/10, P-10
  • Connector and profile groove for Tenso P-14
  • Connector and profile groove/hole for Tenso Divario P-18
  • Visualisation in graphs
  • Connector integrated into an ERP solution from Borm
  • The connector needs to be positioned individually

P-System machining

  • Interface with Wop

 Cabineo connectors/machining

  • Connector and machining for Cabineo 8 + 12
  • The connector needs to be positioned individually
  • As a groove with an exterior contour
  • Visualisation in graphs

Cabineo machining:

  • Interface with Wop

PYTHA Lab GmbH Logo

Pytha

PYTHA Lab GmbH
Inselstr. 3
DE-63743 Aschaffenburg

www.pytha.com

3D CAD Software

P-System connectors / machining

  • Connector and profile groove for Clamex P-14, Medius P 14/10, P-10
  • Connector and profile groove for Tenso P-14
  • Connector and profile groove/hole for Tenso Divario P-18
  • Visualisation in graphs

P-System generator for automatic positioning

  • Number of connectors and distribution
  • Positioning in the plate thickness
  • Visualisation in graphs
  • Surface connections
  • 90° corner connections
  • Angle bisector mitres 2x45°
  • From version 24

P-System machining

  • Triggering the macros provided by the CNC manufacturer
  • The macros on the CNC machine determine the possibilities
  • Machining possible with the P-System disc cutter
  • Interface for Wop

Cabineo connectors/machining

  • Connector and machining for Cabineo 8 + 12
  • As a triple hole
  • The connector can be positioned individually
  • Visualisation in graphs

Cabineo generator for automatic positioning

  • Positioning within the panel thickness
  • Visualisation in graphs
  • 90° corner connections
  • From version 23
rwdm Logo

rwdm

rwdm
René Wetzstein
alte Aescherstr. 25

CH-5615 Fahrwangen

www.rwdm.ch

Datenmanagement for carpenters 

  • Data build-up and hardware automation based on CAD + T
  • Database with over 4'000 hardware stores growing (as of April 2020)
    • >95% fully automatically generated in plan
    • CNC and ComNorm compatible (ComNorm across ERP)
  • Cabinet-, kitchen-, pedestal-, Beistoss- und Blenden-Model
    • Finished CNC programs also for custom-made products
    • Automatic parts list, hardware list

P-System, possibilities with CAD+T

  • Connector and profile groove for Clamex P-14, Medius P 14/10, P-10
  • Connector and profile groove for für Tenso P-14/10
  • Connector and profile groove for / Bohrung für Divario P-18
  • Connector can be positioned individually
  • Automatic positioning possible
  • The CNC machine determines the processing options
  • Parts list possible

Cabineo, possibilities with CAD+T

  • Connector and machining for Cabineo 8 + 12
  • Covercap for Cabineo
  • As a triple hole
  • As a groove with an exterior contour
  • The connector can be positioned individually
  • Automatic positioning possible
  • The CNC machine determines the processing options
  • Parts list possible

SmartWOP

SmartWOP
Tibek CNC-Technik GmbH
Gutenbergstrasse 39
DE-40235 Düsseldorf


www.smartwop.de

SmartWOP: "Clever, simple and fast" 

  • 3D CAD, cabinet unit generator and has interfaces to ERP programs and WOP
  • SmartWOP makes it possible to design furniture very quickly, both as a single order and as a series order, using drag-and-drop
  • The P-System connectors, the 4 mm wooden biscuits and the Lamello Cabineo are stored in the fittings and machining library and are automatically positioned to the depth and thickness of the connection
  • The CNC connection is used to export the designs as finished CNC programs for the CNC machines
  • Special volumes are available for knee wall cabinet, jamb wall cabinet and corner cabinet applications

Spazio 3D

BrainSoftware srl
Via Roma 25/a
IT-31010 Fonte TV

www.spazio3d.com

3D CAD-CAM Software for efficient planning of Lamello products

P-System connector / machining

  • Connector and profile groove for Clamex P-14, Medius P 14/10, P-10
  • Connector and profile groove for Tenso P-14
  • Connector and profile groove/drill hole for Divario P-18
  •  Available for WOP and ISO controller

P-System generator for automatic positioning

  • Number of connectors
  • In the board thickness
  • Illustration

P-System machining

  • Enabling of macros by CNC manufacturer
  • Macros on the CNC machine determine the options
  • Machining is possible with the P-System disc cutter

Cabineo connector / Machining

  • Connectors and machining for Cabineo: 8 + 12
  • Available for WOP and ISO controller

Cabineo generator for automatic positioning

  • Number of connectors
  • Illustration

Cabineo machining

  • Macros enabled by CNC manufacturer


Swiss all CAD AG Logo

Swiss all CAD

Swiss All CAD AG
Widenstrasse 2
CH-9200 Gossau

www.swissallcad.ch

Software for efficient planning of Lamello products

Swood

SWOOD
EFICAD
55 avenue de Melgueil
FR-34280 La Grande Motte

www.swood.eficad.com

SWOOD by EFICAD: "Furniture software from design to manufacture"

  • SWOOD Design is a complete CAD software that is fully integrated into SOLIDWORKS
  • It makes it quick and easy to design a project in a 3D environment and parametric functions
  • The configurator works in a parametric 3D design using drag-and-drop
  • The P-System connectors, the 4mm wooden biscuits or the Lamello Cabineo, for example, can be automatically positioned in the depth and thickness of the connection according to parametrically defined rules from the fitting library
  • The SWOOD Center Service can be linked to the company's databases (e.g. ERP or MES software)
  • The design data can be controlled via SWOOD CAM using post-processors with 3- to 5-axis CNC machines (WOP and ISO interface)

Tapio GmbH Logo

tapio

tapio GmbH
Landsberger Strasse 302
DE-80687 München

www.tapio.one

tapio is intended to help the wood industry to evolve into the digital future itself. A common ecosystem is tapio’s answer to the question “how”. Through tapio companies themselves can shape their digital future.

With tapio machinery manufacturers, toolmakers and material producer use the same technology platform. That way digital solutions for common customers of every size are being discovered. Tapio itself is neutral within this network and considers itself to be a supporter. Customers have the advantage that they rediscover the diversity of their physical world within solutions tapio provides.

TopSolid Missler Software Logo

TopSolid

Missler Software
254 L’Occitane
FR-31670 Labège

www.topsolid.com

3D CAD-CAM software for efficient planning of Lamello products

P-System connector/Machining

  • Connector and profile groove for Clamex P-14, Medius P 14/10, P-10
  • Connector and profile groove for Tenso P-14
  • Connector and profile groove/Drill hole for Divario P-18
  • Connector and profile groove for Bisco P-14, P-10
  • Connector must be individually positioned
  • Graphic illustration
  • Graphic simulation of machining
  • Available for WOP and ISO controller
  • From version 2013

P-System machining

  • Macros enabled by CNC manufacturer
  • The macros on the CNC machine determine the options
  • Machining is possible with the P-System disc cutter

 Cabineo connector/machining

  • Connector and machining for Cabineo 8 + 12
  • Connector must be individually positioned
  • Graphic illustration
  • Graphic simulation of machining
  • Available for WOP and ISO controller
  • From 2017 version

Cabineo machining:

  • Macros enabled by CNC manufacturer
  • Macros on the CNC machine define the options

Truncad Logo

TrunCAD

TrunCAD GmbH
Stegmühlenweg 1
DE-88131 Lindau

www.truncad.de

CAM software for efficient planning of Lamello products

P-System Machining

  • Macros enabled by CNC manufacturer
  • Macros on the CNC machine defines the options
  • Profile groove must be positioned individually
  • From version 11 (2015)
  • Can be purchased with update

Cabineo machining

  • Machining as 3x hole
  • Automatic positioning of counterbore
  • Machining must be positioned individually
  • From 2017 version
  • Available free with update

Lamello Partner Vectorworks

Vectorworks interiorcad

extragroup GmbH
Pottkamp 19
DE-48149 Münster

www.extragroup.de

2D / 3D CAD Software

CAM Software VectorWOP

P-System Connector

  • Connector and profile groove for Clamex P-14, Medius P 14/10, P-10
  • Connector and profile groove for Tenso P-14
  • Visualisation in graphs

P-System generator for automatic positioning 

  • Number of connectors and distribution
  • Positioning in the plate thickness
  • Visualisation in graphs
  • Surface connections
  • 90° corner connections
  • Angle bisector mitres at a huge range of angles
  • Obtuse-angled mitres at a huge range of angles
  • From version 2019

P-System machining

  • Triggering the macros provided by the CNC manufacturer
  • The macros on the CNC machine determine the possibilities
  • Machining possible with the P-System disc cutter
  • Interface with WOP
  • NC-Export possible with CAM Software VectorWOP

Cabineo connectors / machining

  • Connector and machining for Cabineo 8 + 12
  • As a triple hole
  • As a groove with an exterior contour
  • The connector can be positioned individually
  • Visualisation in graphs

Cabineo generator for automatic positioning 

  • Number of connectors and distribution
  • Positioning within the panel thickness
  • Grafische Darstellung
  • 90° Eckverbindungen
  • Ab Version 2020

Cabineo machining

  • Interface for WOP
  • NC-Export possible with CAM Software VectorWOP