Lamello
Verbindungstechnik
Lamello

Cabineo 8 M6

Wear-resistant cabinet connector for various materials and increased strength
Holz verbinden

Description

Cabineo 8 M6 is a one-piece cabinet connector which can be used with all CNC machines because only surface machining is required. The connector is ideal when joining wood composites with materials such as aluminium, steel or compact laminate.
After installing the connector in the board, the pre-assembled metric screw is screwed into a threaded hole or a socket, using a cordless drill. Cabineo impresses with its time-saving processing and assembly as well as the high clamping force which leads to stable connections without the need for additional dowels.

The Cabineo insert M6 is a threaded insert to drive in, which can be used in combination with the Cabineo 8 M6. It is ideal for applications where the thread cannot be cut directly into the workpiece or to increase the strength in corner and dividing panel joints. The Cabineo insert M6 is hammered into the through-hole of the middle panel so that the Cabineo can reach into the insert from both sides. The same connector and insert can be used everywhere for corner and dividing panels.

Buy product

186306
Cabineo 8 M6 starter set
  • Cabineo 8 M6 (80 pieces)
  • Insert nut and cover caps (40 pieces each)
  • Cabineo insert nut tapping aid (1 piece)
  • Cabineo hex bit 1/4" (1 piece)

186315
Cabineo 8 M6, metric thread M6, 500 pieces

186316
Cabineo 8 M6, metric thread M6, 2000 pieces

186345
Cabineo 8 M6 black, metric thread M6, 500 pieces

186346
Cabineo 8 M6 black, metric thread M6, 2000 pieces

186370
Cabineo insert nut M6 x 12.3*, mat. 14-16 mm, 100 pieces

186371
Cabineo insert nut M6 x 12.3*, mat. 14-16 mm, 500 pieces

186375
Cabineo insert nut M6 x 15.3*, mat. 17-25 mm, 100 pieces

186376
Cabineo insert nut M6 x 15.3*, mat. 17-25 mm, 500 pieces

276310
Cabineo tapping aid for insert nut

Product information

Various materials

The Cabineo 8 M6 can be screwed directly into the material (HPL, aluminium, steel, etc.)

Same connector everywhere

Same connector for all joining situations

Wear-free connection

No wear and tear of the workpiece when it is assembled and disassembled multiple times

Technical information

Disclaimer regarding Load Limits
Size (mm):
33.8 x 16.5 x 10.8 mm
Cutter:
Ø 12 mm or smaller
Drill:
Ø 5 mm and Ø 15 mm
Material of connector:
Fibre-glass reinforced plastic
Installation tolerance:
Longitudinal ± 0.1 mm

Corresponding system products

Cabineo tapping aid for insert nut

For sinking the insert nut by min. 1 mm

Wishlist add/remove

Cabineo hex bit 1/4" GL 80mm

For connecting the workpieces with the cordless screwdriver

Wishlist add/remove

Cabineo insert nut M6x15.3

For material thickness 17 - 25 mm

Wishlist add/remove

Cabineo insert nut M6x12.3

For material thickness 14 - 16 mm

Wishlist add/remove