Invis Mx2

Magnet-driven connecting fittings
Holz verbinden


Invis Mx is the unique connection that satisfies the highest demands for aesthetics, stability and productivity. With no visible openings, Invis Mx can be quickly detached and reconnected at any time via its magnet drive. The Invis Mx connectors and studs are quickly and easily screwed into prepared 12 mm drill holes using a cordless drill. The MiniMag is then fixed to the cordless drill and rotated on the surface to close the connection with a clamping force of up to 250 kg per connector.

Buy product

Invis Mx2 Starter Kit in a systainer
  • MiniMag Mx2
  • 20 Invis Mx2 connector sets with 14 mm stud
  • Rasto drill jig with 12 mm drill bit, depth adjuster, bushing
  • Screw bit
  • Flexible shaft
  • Insertion jig

MiniMag Mx2 Kit in a cardboard box
  • MiniMag Mx2
  • Screw bit

Invis Mx2 connector set with 14 mm stud, 20 pcs

Invis Mx2 connector set with 30 mm stud, 20 pcs

Invis Mx2 connector 35 mm, 20 pcs

Invis Mx2 14 mm stud, 20 pcs

Invis Mx2 30 mm stud, 20 pcs

Invis Mx2 center-wall stud for 10-30 mm thickness, 10 pcs

Invis Mx2 screw bit, 1 pcs

Invis Mx2 flexible shaft for MinMag Mx2, 1 pcs

Invis Mx2 insertion jig for studs 14 mm

Product information

Powerfully joined workpieces

The magnet-driven connector enables workpieces to be connected with up to 250 kg of clamping force.

Detachable in seconds

Assembled pieces of furniture can be very quickly detached by reversing the rotating direction of the MiniMag Mx2.

Completely invisible

The magnet-driven connector Invis Mx2 allows for completely invisible, detachable joints

Unique magnet drive

A rotating drive magnet outside the workpiece invisibly drives the screw in the centre of the connector.

Technical information

Disclaimer regarding Load Limits
Size (mm):
Ø 12 × 35 mm
Ø 12 × 14 mm
Ø 12 mm
Material of connector:
Installation tolerance:
± 0.1 mm
Clamping force:
250 kg
Tensile strength (N)

Corresponding system products

Invis Mx2 Screw bit

For quick screw in from the Invis Mx2 connector

Wishlist add/remove

Invis Mx2 insertion tool for studs 14mm

Jig to screw in the hammerhead perfectly vertically

Wishlist add/remove

Invis MiniMag Mx2 incl. screw bit

Is compatible with any standard cordless drill with a speed of 1200 – 1500 min-1

Wishlist add/remove

Spring shaft for MiniMag Mx2

For comfortable operation in a small space

Wishlist add/remove

Rasto drill jig

Universal drill jig without measuring or marking

Read more