Clamex P Medius 14/10

Detachable connector for centre panels from 16 mm material thickness


Clamex P Medius complements the Clamex P-14 connecting fittings for use in shelf units where two shelves meet the dividing panel at the same height. The dividing panel connection Clamex P Medius consists of two parts with different installation depths. The lever part is installed in the shelf, anchored in a 14 mm deep P-System groove. Thanks to its installation depth of just 10 mm and crescent-shaped cut out, the second part can be fitted back-to-back in a dividing panel measuring just 16 mm.

Buy product

Clamex P Medius, 80 pairs

Clamex P Medius, 300 pairs

Clamex P Medius, 1000 pairs

Product information

Ideal for separating panels

Clamex P-14 Medius enables joints of separating panels with panel thicknesses from 16 mm.

Very aesthetic

Only a small, barely visible tool opening of 6mm is used to open and close the connector.

A detachable all-rounder

Workpieces connected with the Clamex P can be detached at any time using the rotating lever.

Fastest connection

Connected in seconds with Clamex or Tenso. Connection is complete within seconds, without waiting time, clamps, or post-processing work.

P-System anchorage

Tool-free anchoring of connectors, without adhesive or screws.

Technical information

Size (mm):
66 x 14.5 x 9.7 mm
52 x 7.5 x 9.7 mm
Ø 100.4 x 7 x 22
Material connector:
Fiberglass reinforced plastic
Material lever:
Zinc die cast
Installation tolerance:
Longitudinal ± 1 mm
Tensile strength (N)
Particle board:
~700 N ≈ 70 kg
Tensile strength (N)
~ 800 N ≈ 80 kg
Tensile strength (N)
~ 900 N ≈ 90 kg

Corresponding system products

Allen key 4mm, 75x55mm

For opening and closing of the Clamex P fittings

Wishlist add/remove

Allen key 4mm, 120x50mm

Top open and close the Clamex P connectors

Wishlist add/remove

Clamex P installation tool, flexible

For the easy opening and closing of Clamex P connectors

Wishlist add/remove

P-System drill jig, for Clamex P-14, P-10 and Medius

Drilling of the Clamex P drill hole, for angles from 22.5 - 180 degrees

For materials up to 60mm thickness

Wishlist add/remove

P-System drill jig long, for Clamex P-14, P-10, Medius

Drilling of the Clamex P drill hole, for angles from 22.5 - 180 degrees

For materials up to 80mm thickness

Wishlist add/remove

Divario P-18

Self-clamping, invisible connector for slide insertion

Read more
selbstspannender Verbindungsbeschlag in allen Winkeln

Tenso P-14

Self-clamping connector as gluing aid for all angles

Read more
Verbindungsbeschläge für Materialstärke

Clamex P-10

Detachable connector for material thickness from 12 mm

Read more

Bisco P

Aligning element for the P-System

Read more
grosse Farbpalette

Clamex cover caps

Cover caps for Clamex drill holes

Read more

Zeta P2

The machine for the evolving P-System, saving you time daily

Read more

P-System CNC tools

Use on a CNC machine

Read more
wiederlösbarer Möbelverbinder

Clamex P-14

Detachable furniture connector

Read more